User manual SONY VCT-HM1

[. . . ] If it is not  installed properly, an accident may occur. Install the unit securely using the supplied accessory parts. [. . . ] Some spots, scratches and damage may occur to the mounting equipment due to  vibration, shock, falling, heat, direct sunlight, dirt, fine particles of stone, dust, rain or water, etc. use the mounting equipment in a suitable environment. This unit is designed for use on a bicycle. Do not mount it on anything other than  the handlebar of a bicycle. The  mounted equipment may not work properly due to vibration. The illustrations in these Operating Instructions may differ from the actual product. How to adjust the angle of the mounting plate (fig. ΍) Press and hold the button on the left side of the cradle, and adjust the angle. ΍)  Cradle for bicycle  Mounting cushions (A/B/C, 2 of each) A,  B and C have different grip profile thickness. Mounting cushions A, B, and C have their codes printed in the center of the release paper  side respectively. ŋ在骑车时操作设备。  Adjustment sheets (thick/thin, 1 of each)  Hex wrench Operating Instructions (this document)  Design and specifications are subject to change without notice. ΋-)  Attach the mounting cushion  to the cradle. Remove the bolt of the cradle using the hex wrench  (fig. Without removing the release paper, attach the mounting cushion to the cradle and determine the appropriate mounting cushion size by attaching temporarily to the handlebar. [. . . ] Γ Carefully align and attach the adjustment sheet  to the handlebar (fig. Γ Tighten the bolt with the hex wrench , and secure the cradle on the handlebar (fig. [. . . ]