User manual SONY VCT-PG10RM

[. . . ] This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] ⭠Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ⭠Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Clean the tripod with a soft cloth lightly moistened with a mild detergent solution. After using the tripod at a location subject to sea breezes, be sure to wipe it clean with a dry cloth. (F) If the remote plug is not connected securely, you may not be able to operate the video camera recorder. Set the power switch of the video camera recorder to "CAMERA" and then to recording standby mode. J When you do not use the Remote Commander Insert the remote plug into the pan handle securely to prevent the remote plug from being broken. Maximum load 2 kg (4 lb 6 oz) Panning angle 360 degrees Tilting angle 90 degrees down, 60 degrees up Stages of legs 4 stages Remote control Function: Recording start/stop, standby/lock, Zooming Cord length: 320 mm (125/8 inches) Pan handle length: 250 mm (97/8 inches) Dimensions Maximum height: Approx. 860g (1 lb 15 oz) Supplied accessory Operating instructions (1) Design and specifications are subject to change without notice. Depending on the type of your video camera recorder; if you press the zoom button still more, the zooming will be faster. [. . . ] h To Finish Recording Slide the recording standby switch to LOCK. The power of the video camera recorder is turned off. [. . . ]