User manual SONY VCT-SCM1

[. . . ] For details, refer to the operating instructions supplied with the camera. Notes on use of the mounting sheet ???????????? 2013 Sony Corporation Printed in China ??In the case of the following dashboards, use the mounting sheet. If not using the mounting sheet, the suction cup may not stick to the dashboard securely, and may damage or deform the dashboard. [. . . ] ??The suction cup may be damaged if it is forcefully removed, or the mount is forced in a horizontal direction while still attached to the dashboard, or on the mount is forced in a horizontal direction before completely removing the suction cup from the dashboard. ??If the temperature of the surface of the dashboard is low, for example, in winter or when used in a cold region, removal of the suction cup may be difficult. ?? Maintenance ???????? ??????? PUSH?????????LOCK/RELEASE?????? ????????/Do not turn the LOCK/RELEASE ???????????????????? ??Do not use any alcohol, detergent, etc. ??Do not let water get into the mount as it may cause malfunction. ??Make sure that the sponge is not so wet as to drip. Otherwise, dirt will be difficult to remove, or the surface of the suction cup may be damaged. ??It takes time for the suction cup to dry completely. Do not use any tissue or towel to wipe off the surface of the suction cup. ??Check periodically if the surface of the suction cup is dirty. Tip You can also use a soft, wet lint-free cloth to clean the surface of the suction cup. Notas sobre la ventosa Hinweise zur Montagefolie Entretien lever while holding down the PUSH button. Camera base ?/?* Dial screw A ?/?* Screw cap ?* Joint arm A ?Cover Hinweise zum Saugnapf ?????????* ????? Mantenimiento ? ????????????????? ??????????? ??????????? * This product can be configured for different heights. - ?) Before Installation Mount the mount on an area of the dashboard which is smooth and horizontal. ??) To prevent the camera from dropping, hold the camera. - ?) When detaching the mount from the dashboard, reverse the attaching procedure. 1 Turn the LOCK/RELEASE lever clockwise 90 degrees to unlock. 2 Pull the tab of the suction cup to remove. 9 oz) Included items Suction cup mount (1), Cover (1), Mounting sheet (1), Strap (1), Cleaning sponge for suction cup (1), Set of printed documentation Design and specifications are subject to change without notice. [. . . ] it may result in an accident or injury. ??Do not install the unit in a place exposed to rain or water, or in a location subject to high humidity or dust. Installing the unit in the location described above may cause a malfunction or injury. Doing so may result in an accident or injury. [. . . ]