User manual SONY VCT-VPR10

[. . . ] ??????????? ?????????????????????????????????????????? * Before operating the product, please read this manual thoroughly and retain it for future reference. 36 Connecting cable for REMOTE Terminal * The tripod and the connecting cable  for Multi Terminal are included together at the time of purchase. ???? WARNING To reduce the risk of fire or electric shock, 1) do not expose the unit to rain or moisture. [. . . ] 2 Align the pin and the camera mounting screw of the camera mounting shoe with the positioning hole (a) and the screw hole for the tripod. Caution When attaching a camera other than a video camera to the tripod, position it so that it does not to touch the pin for video cameras. 3 Push the camera mounting shoe fully in until it clicks into place. Then push the camera mounting shoe lock lever to the back to prevent the shoe from coming out. 4 Connect the terminal of the connecting cable (c) to the terminal of the camera. If the cable is too long, clamp the cable with a cable clamper (b). Caution ??The multi connector must be inserted the right way up. Be careful not to connect it upside down or you may damage the tripod or camera. ??There are two types of camera multi terminal. ??When connecting the connecting cable for multi terminal to the multi terminal of the camera (shaped as in (d)), align the ?Forcing the plug in the wrong way round will cause a malfunction. 1 Turn on the power of the camera and set it to standby mode. The POWER/REC lamp (e) of the Remote Commander lights in green. 2 Set the camera to the movie or still image mode. Caution If you leave the camera in standby mode for a while, the camera turns off automatically. To resume standby mode, turn on the camera, pressing the POWER button (a) of the Remote Commander. To record a moving image Press the START/STOP button (c). The POWER/REC lamp lights in red and recording starts. to stop recording , press the START/ STOP button again. To record a still image Half-press the PHOTO button (b) to bring the camera into focus, and then press the button all the way. Locking function (B) During bulb shooting or continuous shooting, you can set the PHOTO button so that it is held down. With the PHOTO button fully pressed down, slide it in the direction of the arrow. [. . . ] You can set the grid lines by pressing the GRID LINE button. See the operating instructions of your camera for details. To cancel the grid line display, press the GRID LINE button until the grid line display turns off. * he photograph is just an example T of the screen. [. . . ]