User manual SONY VGC-RA716GY

[. . . ] Welcome Thank you for purchasing a Sony VAIO® computer!Your new computer is a superb blend of high technology and easy-to-use functionality. The information provided here is designed to help you to become familiar with the hardware and software programs included with your system. View the Electronic Flyer, which provides updates and supplemental information about your computer. Go to the Sony Online Support Web site, to view the VAIO® Computer Specifications, which lists your computer's hardware specifications and preinstalled software information. [. . . ] Unplug your computer and disconnect any peripheral devices. Locate the two tabs on the top edge of the back panel. Gently lift these tabs and slide the top cover towards the back of the unit. Lift the top cover up and set aside. Rem ov ing the top cov er If you open the cover or panels immediately after you shut down your computer, the components may be too hot to touch. Wait until the internal parts of the system unit cool down before you attempt to open the unit. Removing the side panel 1. Shut down your computer and turn off all peripheral devices, such as your printer. Unplug your computer and disconnect any peripheral devices. Press the release button on the top edge of the side panel. Rem ov ing the side panel Page 173 4. Lift the side panel away from the unit and set aside. Page 174 About Closing the Computer Replacing the side panel 1. Align the tabs on the bottom of the side panel to the tracks on the edge of the chassis frame. Gently press the side panel against the chassis, until the release button locks the panel back into place. Replacing the side panel Replacing the top cover 1. Align the tracks on the top cover to the tracks on the chassis frame. Gently slide the top cover forward onto the chassis until the back panel tabs lock the panel into place. Replacing the top cov er Page 175 About Add-on Card Installation Your computer may have one or more open expansion slots, depending on the model configuration. An expansion slot enables you to install add-on cards to expand the functionality of your system. The length of the add-on card should not exceed 9. 05 inches. Add-on card configuration varies by model. Some models, such as Configure-to-Order (CTO) systems, may contain preinstalled add-on cards. Observe the proper safety precautions when you add cards to your Sony computer. See Before upgrading your computer. Page 176 Installing an add-on card 1. Shut down your computer and turn off all peripheral devices, such as your printer. Unplug your computer and any peripheral devices. Gently place the unit on its side and remove the side panel. Remove the slot cover's screw, and then remove the slot cover. When removing a slot cover, be careful not to damage components on the system board or add-on cards. You may need to temporarily remove add-on cards or other components that may be next to the slot cover you want to remove. Rem ov ing the slot cov er 5. Install the add-on card by inserting it into the expansion slot and secure it with the screw from the expansion slot cover. Installing an add- on card Page 177 6. [. . . ] arrange for repairs or check repair status. e-mail your question or comments to the Sony Customer Information Services Center. check pricing and availability for products, accessories and parts, as well as purchase online. access the Sony Solutions Knowledge Base, a database that contains answers to many frequently asked questions. Sony Customer Information Services Center If other support options do not resolve your issue, you can contact a Sony Support representative directly. [. . . ]