User manual SONY VAIO VGN-AR770NA

[. . . ] Refer to them whenever you call upon your Sony dealer regarding this product. ___________________ Certain countries may regulate disposal of the battery used to power this product. Please consult with your local authority. For the customers in the USA and Canada DISPOSAL OF NICKEL METAL HYDRIDE BATTERY. DISPOSE OF PROPERLY. You can return your unwanted nickel metal hydride batteries to your nearest Sony Service Center or Factory Service Center. [. . . ] "00" appears and the playing order increases by one. 4 5 Repeat steps 2 and 3 to select the tracks in your favorite order. Press RPT/ENT until the PGM play starts. To check the program During programming: Press RPT/ENT repeatedly before step 5. During the PGM play: Press PLAY MODE repeatedly until "PGM" flashes, then press RPT/ENT. Each time you press RPT/ENT, the track number appears. Notes · When you finish entering the 64th track in step 3, the first selected track appears in the display. · If you select more than 64 tracks, the first selected tracks are erased. 12 B Available features G-PROTECTION function The G-PROTECTION function has been developed to provide excellent protection against sound skipping while jogging. When you set the G-PRO switch on your CD player to "2", the G-PROTECTION function will be enhanced compared to "1. " To walk with the CD player and enjoy high quality CD sound using the G-PROTECTION function, set the G-PRO switch to "1. " While taking harder exercise, it is recommended that you set it to "2. " Set G-PRO (under the lid) to "1" or "2. " Displaying CD text information When you play a CD containing CD text information, the track name, disc name, artist name, etc. , appear in the display. Display on the remote control "Track number" appears. CD text appears in this portion. * * While the CD player is reading the information on the CD, "READING" appears. Available features Press DISPLAY. Each time you press the button, the display changes as follows: Display Note Sound may skip if: ­ the CD player receives stronger continuous shock than expected or ­ a dirty or scratched CD is played. Normal play Track number and name of the current track Press DISPLAY Track number and name of once. the current track/artist name Press DISPLAY The number of tracks left** twice. and disc name/artist name ** Not displayed during single play, shuffle play or PGM play. Note CD text displayed on this CD player is in English only. 13 Checking the remaining time on the CD and the number of tracks left You can check the remaining time on the CD and the number of tracks left using DISPLAY. When playing a CD containing CD text information, you cannot use this function. Emphasizing the bass sound (SOUND) You can emphasize the bass-boosted sound. Press SOUND to select "BASS 1" or "BASS 2. " No indication (Normal play) Press DISPLAY. Note on the rechargeable batteries If the battery is new or has not been used for a long time, it may not be charged completely until you charge and discharge it several times. Note on carrying the rechargeable batteries Use the supplied battery carrying case to prevent unexpected heat. If the rechargeable batteries and the metallic objects are contacted, heat or fire may occur due to a short circuit. When to charge the rechargeable batteries You can check the remaining power of the batteries in the display. Battery power is full. r r r r Battery power is getting low. Battery power is low. r Lobatt* Batteries are depleted. * Beep sounds. To keep the original battery capacity for a long time, charge the batteries only when they are completely depleted. Notes · The indicator sections of roughly show the remaining battery power. One section does not always indicate one-fourth of the battery power. · Depending on operating conditions, the indicator sections of may increase or decrease. 20 Using the dry batteries Make sure to use the supplied external battery case. Use only the following dry battery type for your CD player: · LR6 (size AA) alkaline batteries When to replace the batteries You can check the remaining power of the batteries in the display. Battery power is full. r r r r 1 Unlock the cap of the external battery case, and insert two LR6 (size AA) alkaline batteries by matching the 3 to the diagram outside the external battery case and close the cap of the external battery case. Battery power is getting low. Battery power is low. r Lobatt* Batteries are depleted. * Beep sounds. When the batteries are depleted, replace both batteries with new ones. The batteries in the CD player and external battery case are discharged simultaneously. Notes · Be sure to remove the AC power adaptor when attaching the external battery case. · When using the rechargeable batteries and dry batteries together to extend power, use fully charged rechargeable batteries and new dry batteries. Connecting a power source 2 Connect the external battery case to the CD player. With the v side down to EXT BATT/ DC IN 4. 5 V 21 Notes on the power source Disconnect all power sources when the CD player is not used. On AC power adaptor · Use only the AC power adaptor supplied or recommended in "Accessories (supplied/ optional). " Do not use any other AC power adaptor. It may cause a malfunction. Polarity of the plug · When disconnecting the AC power adaptor from the AC outlet, grasp the adaptor itself. [. . . ] (pages 7, 19, 21) c The buttons are locked. (page 15) c The CD is dirty or defective. (page 23) c Check that the CD is inserted with the label side up. (page 7) c Moisture condensation has occurred. [. . . ]