User manual SONY VAIO VGN-AR770ND

[. . . ] To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. CAUTION The use of optical instruments with this product will increase eye hazard. Owner's Record The model and the serial numbers are located at the rear. Record the serial number in the space provided below. [. . . ] The CD player automatically scans the radio frequencies and stops when it finds a clear station. (Continued) 9 Listening to the radio To improve broadcast reception For FM, extend the headphones cord. Headphones For AM, reorient the CD player itself. Note Keep the headphones connected to the i jack of the CD player. The headphones cord works as the FM antenna. If it is hard to hear the FM broadcast Set the LOCAL/DX switch to "LOCAL" using a pointed material. Under the normal conditions, set to "DX. " When listening to the radio on batteries If you connect the external power source plug to the DC IN 4. 5 V jack of your CD player, the CD player will turn off. Turn it on by pressing RADIO ON·BAND to continue listening to it. 10 Presetting radio stations You can store radio stations into the CD player's memory. You can preset up to 30 stations, 5 for each band (FM1 - 5 and AM) in any order. 1 2 3 Press RADIO ON·BAND to turn on the radio. Press RADIO ON·BAND to select the band. Hold down MEMORY until "PRESET" flashes in the display. From this step on, start the next operation within 10 seconds after you finished the previous operation. If 10 seconds pass with nothing done, "PRESET" stops flashing which shows that the CD player has exited the PRESET MEMORY standby mode. If this happens, start from step 3 again. Press PRESET + or ­ repeatedly to select the preset number you want to store the station on while "PRESET" flashes. Lo batt* Batteries are depleted. * Beep sounds. When the batteries are depleted, replace both batteries with new ones. 17 Using the AC power adaptor Connect the AC power adaptor (not supplied) to the DC IN 4. 5 V jack and an AC outlet. to an AC outlet Notes on the power source Disconnect all power sources when the CD player is not used. On AC power adaptor · Use only the AC power adaptor recommended in "Accessories (supplied/ optional). " Do not use any other AC power adaptor. It may cause a malfunction. Polarity of the plug to DC IN 4. 5 V · When disconnecting the AC power adaptor from the AC outlet, grasp the adaptor itself. · Do not touch the AC power adaptor with wet hands. On dry batteries · Do not charge the dry batteries. · Do not throw the batteries into fire. · Do not carry the batteries with coins or other metallic objects. It can generate heat if the positive and negative terminals of the battery are accidentally contacted by a metallic object. · Do not mix rechargeable batteries with dry batteries. · Do not mix new batteries with old ones. · Do not use different types of batteries together. · When the batteries are not to be used for a long time, remove them. · If battery leakage occurs, wipe off any deposit in the battery compartment, and install new batteries. [. . . ] (page 6) The CD does not play or "no dISC" appears in the display when a CD is placed in the CD player. "Hold" appears in the display when you press a button, and the CD does not play. The rechargeable batteries cannot be charged in the battery compartment of this player. c Use only the AC power adaptor or car battery cord in "Accessories (supplied/optional). " (page 23) c Remove all power sources, then insert the batteries or connect the AC power adaptor again. (page 14) c The CD is dirty or defective. (page 19) c Check that the CD is inserted with the label side up. [. . . ]