User manual SONY VAIO VGN-AW160J/Q

[. . . ] Keep your forearms horizontal, with your wrists in a neutral, comfortable position while using the keyboard, touch pad, or external mouse. Let your upper arms hang naturally at your sides. Take breaks during sessions with your computer. Excessive use of the computer may strain muscles or tendons. [. . . ] See Connecting the Port Replicator for more information. Plug the power cord for the flat-panel display into an AC outlet. Plug the display cable into the DVI port on the port replicator. Turn on the computer and flat-panel display. Press the Fn+F7 keys to toggle the display between your computer, the flat-panel display, or both the computer and flat-panel display. See Selecting a display for more information. You cannot use the Monitor (VGA) port on your computer when a port replicator is connected to the computer. Use the DVI or Monitor (VGA) port on the port replicator instead. Connecting a Flat- Panel Display Page 99 Disconnecting a Port Replicator Disconnecting a port replicator when the computer is in a power saving mode (Standby or Hibernate) or the battery power is low may result in data loss or a computer malfunction. You can disconnect a port replicator when the computer is on or off. When the battery is low, turn off the computer before you disconnect a port replicator. To disconnect a port replicator 1. Close any active programs to prevent data loss, and disconnect the AC adapter. Push the release levers on each side of the port replicator to release the computer from the port replicator. Releasing a Com puter from a Port Replicator 3. Lift the computer away from the port replicator. Disconnecting a Port Replicator Page 100 Audio and Video Connections Using i. LINK Digital Video Recorders You can connect a digital video (DV) recorder, such as a Sony digital video recorder, to the i. LINK®1 S400 (IEEE 1394) port on your computer. The i. LINK digital video camera recorder is an external device that enables you to record, view, and transfer digital images to your computer via the i. LINK port. i. LI N K is a trademark of Sony us ed to des ignate that a produc t c ontains an I E E E 1 3 9 4 c onnec tor. Select one set of instructions from the following list: If your digital video camera recorder is compatible with the preinstalled programs, the Digital Video Device window appears when you connect the camera to the computer. Select the program you want to use in this window, and click OK. Select a program in which to view your images. Click Start, and click Welcome to VAIO life. Click Movies, Music, and Pictures and select a program in which to view your images. Page 105 Using Computer Monitors and Projectors You can connect a computer monitor or a projector to your computer. Page 106 Connecting a computer monitor Your computer can display images on the computer screen (LCD), an external monitor or display, or both the LCD and the external device. If you purchased a port replicator, you can connect your computer to a flat-panel display. See Connecting a Flat-Panel Display for more information. To connect a computer monitor 1. Make sure the computer monitor is plugged into an AC outlet. Plug the display cable into the Monitor (VGA) port If it is not already on, turn on the computer monitor. Press the Fn+F7 keys to toggle the display between your computer, the monitor, or both the computer and monitor. See Selecting a display for more information. [. . . ] PictureGear Studio still image management software displays still images from your hard drive or a Sony digital still camera. The still images appear in a convenient light-table format so that you can easily view the contents of an entire folder, create your own photo albums, and make prints. Web site http://www. sony. com/pcsupport Telephone 888-4-SONY-PC (888-476-6972) Quattro Pro® Corel Corporation Web site http://www. corel. com Quicken® New User Edition Intuit Inc. Web site http://www. intuit. com/support/quicken/ RecordNow! [. . . ]