User manual SONY VAIO VGN-CS108E/R

[. . . ] You will soon be producing home video that you can enjoy for years to come. To prevent fire or shock hazard, do not expose the unit to rain or moisture. A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS1362 (i. [. . . ] We recommend setting the POWER switch to PLAYER or removing the cassette so that your camcorder does not automatically turn off while you are entering title characters. Using the built-in light You can use the built-in light to suit your shooting situation. The recommended distance between the subject and camcorder is about 1. Press LIGHT until the indicator appears on the screen while your camcorder is in CAMERA mode. If you turn the POWER switch to OFF (CHARGE), the built-in light turns off simultaneously. You cannot turn the built-in light on by turning the POWER switch to CAMERA again. To turn on the built-in light again, press LIGHT again in CAMERA mode. To turn off the built-in light To turn on the built-in light automatically press LIGHT until the indicator appears on the screen. The built-in light automatically turns on and off according to the ambient brightness. Using the built-in light CAUTION Be careful not to touch the lighting section, because the plastic window and surrounding surfaces are hot while the light is on. It remains hot for a while after the light is turned off. You can record and edit a picture with the connected VCR by using your camcorder as a player. make the indicators disappear by pressing DISPLAY . If you do not make the indicators disappear, they are recorded on tapes. (1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert the recorded tape into your camcorder. (2) Set the input selector on the VCR to LINE. Refer to the operating instructions of your VCR for more information. (4) Play back the recorded tape on your camcorder. Refer to the operating instructions of your VCR for more information. When you have finished dubbing a tape You can edit on VCRs that support the following systems 8 mm, Hi8, Digital8, VHS, S-VHS, VHSC, S-VHSC, Betamax, mini DV or DV Connect using an S video cable (optional) to obtain high-quality pictures With this connection, you do not need to connect the yellow (video) plug of the A/V connecting cable. First, select the icon, then the menu item and then the mode. (5) If you want to change other items, select RETURN and press the dial, then repeat steps from 2 to 4. [. . . ] Do not disassemble nor modify the battery pack. Charging while some capacity remains does not affect the original battery capacity. ­ CCD-TRV49E/TRV59E/TRV78E/TRV98E only To avoid possible damage from battery leakage or corrosion, observe the following: · Be sure to insert the batteries with the + ­ polarities matched to the + ­ marks. Do not use a combination of new and old batteries. [. . . ]