User manual SONY VAIO VGN-CS110E/P

[. . . ] (When the projector is used in simple mode, it is not necessary to install this software. This Quick Reference Manual explains the connections and basic operations of this unit, and gives notes on operations and information required for maintenance. Htm" file, doubleclick on the Operating Instructions you want to read from among those in "Operating_Instructions" folder. If the Adobe Acrobat Reader is not installed in your computer, you can download free Acrobat Reader software from URL of Adobe Systems. [. . . ] /1 key is pressed to turn off the power and the ON/STANDBY indicator changes to red. The lamp used as a light source is consumable product. Thus, replace the lamp with a new one in the following cases. ⷠWhen the lamp has burnt out or dims · The LAMP/COVER indicator lights up The lamp life varies depending on conditions of use. use an LMP-C161 Projector Lamp as the replacement lamp. Use of any other lamps than the LMP-C161 may cause damage to the projector. Be sure that the projector is stable after turning it over. Open the lamp cover by loosening the screw with a Phillips screwdriver. The lamp remains not after the projector is turned off with the ?If you touch the lamp, you may burn your finger. When you replace the lamp, wait for at least an hour for the lamp to cool. Wash the air filter with a mild detergent solution and dry it in a shaded place. Attach the air filter so that it fits into the each claws (8 positions) on the air filter covers and replace the cover. When it becomes difficult to remove the dust from the filter with a vacuum cleaner, remove the air filter and wash it. Turn the power off and unplug the power cord. If you neglect to clean the air filter, dust may accumulate, clogging it. As a result, the temperature may rise inside the unit, leading to a possible malfunction or fire. ⷠIf the dust cannot be removed from the air filter, replace the air filter with the supplied new one. ⷠBe sure to attach the air filter cover firmly; the power can not be turned on if it is not closed securely. If the projector appears to be operating erratically, try to diagnose and correct the problem using the following instructions. Symptom Cause and Remedy The power is not turned on. ⷠThe power has been turned off and on with the ? [. . . ] consult with the qualified Sony personnel. Flashes when the lamp cover is not secured firmly. You can turn on the projector with the I/1 key. Lights in green when the power is turned on. [. . . ]