User manual SONY VAIO VGN-CS115J/W

[. . . ] And don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Don't throw away batteries with general house waste; dispose of them correctly as chemical waste. WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] STD The dynamic range is compressed as intended by the recording engineer. MAX The dynamic range is compressed dramatically. Tip Dynamic range compressor lets you compress the dynamic range of the soundtrack based on the dynamic range information included in the Dolby Digital signal. STD" is the standard setting, but it only enacts light compression. Therefore, we recommend using the "COMP. This greatly compresses the dynamic range and lets you view movies late at night at low volumes. Unlike analog limiters, the levels are predetermined and provide a very natural compression. Amplifier Operations LEVEL menu parameters x T. TONE (Test tone) Lets you adjust the speaker levels and balance while listening to the test tone from your listening position. For details, see "8: Adjusting the speaker levels and balance (TEST TONE)" (page 33). x FRT BAL (Front speaker balance) Lets you adjust the balance between front left and right speakers. x CNT LVL (Center speaker level) x SL LVL (Surround left speaker level) x SR LVL (Surround right speaker level) x SW LVL (Sub woofer level) 41US Adjusting the tone (TONE menu) You can use the TONE menu to adjust the tonal quality (bass/treble level) of the front speakers. These settings are applied to all sound fields. Select "2-TONE" in the amplifier menus. · DUAL M (Main) Sound of the main language will be output. · DUAL S (Sub) Sound of the sub language will be output. · DUAL M+S (Main + Sub) Mixed sound of both the main and sub languages will be output. Settings for the video (VIDEO menu) You can use the VIDEO menu to reassign the component video input to another input and to name inputs. Select "6-VIDEO" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 38) and "Overview of the menus" (page 39). VIDEO menu parameters x COMP. (Component video assign) Lets you reassign the component video input to another input. For details, see "Watching component images from other inputs" (page 57). x A. V. Y (Yes) (Delay time: 68 ms) The audio output is delayed so that the time gap between the audio output and visual display is minimized. N (No) (Delay time: 0 ms) The audio output is not delayed. Notes · This parameter is useful when you use a large LCD or plasma monitor or a projector. · This parameter is valid only when you use a sound field selected with the 2CH or A. F. D. [. . . ] · Move your audio components away from the TV. · Assign the component video input correctly. The source image input to the HDMI jack on the receiver is not output from the TV. · Depending on the playback component, you may need to set up the component. [. . . ]