User manual SONY VAIO VGN-CS290JDQ

[. . . ] And don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble. [. . . ] c) The default setting for models of area code U, CA is "ft. " and for models of other area code is "m". 33GB Adjusting the level (LEVEL menu) You can use the LEVEL menu to adjust the balance and level of each speaker. These settings are applied to all sound fields. Select "1-LEVEL" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 31) and "Overview of the menus" (page 32). x D. RANGE (Dynamic range compressor) Lets you compress the dynamic range of the sound track. This may be useful when you want to watch movies at low volumes late at night. Dynamic range compression is possible with Dolby Digital sources only. OFF The dynamic range is not compressed. STD The dynamic range is compressed as intended by the recording engineer. MAX The dynamic range is compressed dramatically. Tip Dynamic range compressor lets you compress the dynamic range of the soundtrack based on the dynamic range information included in the Dolby Digital signal. (Digital audio input decoding priority) Lets you specify the input mode for the digital signal input to the DIGITAL IN jacks. AUTO Automatically switches the input mode between DTS, Dolby Digital or PCM. PCM PCM signals are given priority (to prevent interruption when playback starts). However, when other signals are input, there may be no sound depending on the format. AUTO" and the sound from the digital audio jacks (for CD, etc. ) is interrupted when playback starts, set to "DEC. PCM". x NAME IN (Naming preset stations) Lets you set the name of preset stations. For details, see "Naming preset stations" (page 49). 36GB x DUAL (Digital broadcast language selection) Lets you select the language you want to listen to during digital broadcast. This feature only functions for Dolby Digital sources. · DUAL M/S (Main/Sub) Sound of the main language will be output through the front left speaker and sound of the sub language will be output through the front right speaker simultaneously. · DUAL M (Main) Sound of the main language will be output. · DUAL S (Sub) Sound of the sub language will be output. [. . . ] · Select a stronger FM station. 58GB The RDS information that you want does not appear. * · Contact the radio station and find out whether they actually provide the service in question. If so, the service may be temporarily out of order. There is no picture appears on the TV screen or monitor. · Make sure you have connected the video output of your video component to the TV. Error messages If there is a malfunction, the display shows a message. [. . . ]