User manual SONY VAIO VGN-CS290JDW

[. . . ] Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. [. . . ] 4 Select the first character using the V/v buttons. Press b to 5 the secondshift to second character and select character using V/v buttons. Press ENTER to confirm your Area Code selec6 tion, then press SETUP/MENU to exit the menu. Note Confirmation of the 4-digit password is necessary when the password is changed (see Changing the 4-digit password below ). Changing the 4-digit password Follow Steps 1-2 as shown above to the left (Rating). Enter the old password, then press ENTER. Select Change using V/v buttons then press ENTER. Enter the new 4-digit password, then press ENTER. Enter exactly the same password a second time and verify by pressing ENTER. 1 2 3 4 5 Select rating to 8 using V/v buttons. 4 One (1)ahas thefrom 1playback restrictions. least Eight (8) has the most playback restrictions. 2 Press X (PAUSE) repeatedly to advance the H (PLAY). PLAY 3 It is not necessary to select the tape speed for playback. It will be automatically selected by the DVD/VCR Receiver. In playback, the TV/VIDEO selector switches to VIDEO mode automatically. video picture one frame at a time while viewing a still picture. 3 To return to playback, press H (PLAY). Press x (STOP) to stop playback. STOP appears on the TV screen. If the tape reaches the end before x (STOP) is pressed, the DVD/VCR Receiver will automatically stop, rewind and eject the tape, and it will turn itself off. Slow Motion 1 While in still mode, press SLOW T. The tape will be played back at a speed 1/19 times slower than the normal speed. During slow playback, use V/v on the Remote Control to minimize noise bands. If slow motion mode continues for more than 3 minutes, the DVD/VCR Receiver will automatically change to playback mode. Tracking Control Auto Tracking The automatic tracking function adjusts the picture to remove snow or streaks. The Auto Tracking function works in the following cases: A tape is played back for the first time. Streaks or snow appear because of scratches on the tape. 2 To return to playback, press H (PLAY). CM Skip (Commercial Skip) This is useful for skipping commercials or short program segments. The tape will fast forward picture search through 30 seconds of recording. Skipping time can be extended by pressing CM SKIP repeatedly. [. . . ] The antenna is positioned or connected poorly. Correction Wipe them with a cloth slightly moistened with alcohol. Connect the speakers and components securely. Move your TV away from the audio components. [. . . ]