User manual SONY VAIO VGN-CS390

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. [. . . ] If "FOLDER03" is erased, the name of "FOLDER04" will remain the same. 34GB Moving Messages to a Different Folder You can move the recorded messages to another folder during playback. MENU FOLDER ENTER CANCEL Jog lever (>/. ) Example: Moving Message 3 in FOLDER02 to FOLDER03 Editing Messages 1 2 Play back the message you want to move. Press FOLDER. The first and last 5 seconds of the message will be played back 10 times, while "MOVE MSG. ?" is displayed and flashes and the destination folder with a black background. The folder with the message you want to move The destination folder 3 Press the jog lever up or down (>/ . ) to select the folder you want to move the message into, and then press ENTER. The message is moved in the destination folder. Messages are sorted in order of the recorded date and time or the number of the priority marks in the folder. To cancel moving the message(s) Press CANCEL before step 3. Note The move function does not duplicate a message in another folder. When you move a message to another folder, the one in the previous folder will be deleted. 35GB Adding Priority Mark(s) -- Priority Mark Function Usually the recorded messages are lined up in the order of recording. By adding priority marks (v) to important messages, you can renumber the messages in the order of their priority. There are four levels, "vvv" (the most important), "vv", "v", and no priority mark. You can add priority marks both in the stop mode and in playback mode. PRIORITY ENTER CANCEL Jog lever (>/. ) 1 2 Select or play back the message you want to mark. Press PRIORITY. "PRIORITY" will flash on the display window. 3 4 Press the jog lever up or down (>/ . ) to select the number of priority mark(s) (v) while "PRIORITY" is flashing. Press ENTER. The setting is finished and the messages will be renumbered. To cancel setting priority mark(s) Press CANCEL before step 3. 36GB Messages with priority mark(s) Messages are sorted in order of the number of priority mark(s) (v) in a folder. Messages without a priority mark are moved behind the messages with priority mark(s). The alarm setting mode will be displayed in the display window. Continued 43GB Playing Back a Message at a Desired Time with an Alarm (continued) 4 Press the jog lever up or down (>/ . ) to select "ON". If "ON" has already been selected, follow the next steps. 5 Press ENTER. "DATE" will be displayed in the display window. 3 Set the alarm date and time. To play back on a desired date 1 Press ENTER while "DATE" is displayed. 2 Press the jog lever up or down (>/ . ) to select the year digits and press ENTER. 3 Set the month, day, and the time in sequence, then press ENTER. To play back once a week Press the jog lever up or down (>/. ) to select the day of the week ("SUN" for Sunday to "SAT" for Saturday). Then press ENTER. To play back at the same time every day Press the jog lever up or down (>/. ) to select "DAILY". Then press ENTER. 44GB 4 Select the alarm time. 1 Press the jog lever up or down (>/ . ) to select the hour digits, and press ENTER. 2 Press the jog lever up or down (>/ . ) to select the minute digits, and press ENTER. 5 Press the jog lever up or down (>/ . ) to select the alarm sound either from "BEEP & PLAY" (for starting playback after the alarm) or "BEEP ONLY" (for only the alarm). Press ENTER. The setting is finished. 6 7 Press MENU to exit the menu mode. The display returns to the normal display. ", " is displayed when the message having an alarm setting is selected. Other Functions To go back to the previous step In steps 2 through 5, press CANCEL to go back to the previous step. When the set date and time comes At the set time, the alarm will sound for about 10 seconds and the selected message will be played back (If you have selected "BEEP ONLY" in step 5, only the alarm will sound). [. . . ] 14, Microphone, built-in . . . . . . . . . . . . . . . . . 62 62 47 10 55 11 55 49 31 28 35 20 12 27 20 14 18 18 24 62 16 35 D Digital Voice Editor . . . . . . . . . . . . . . . . . . . Display mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 52 26 24 31 39 E Easy search . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]