User manual SONY VAIO VGN-CS390DCB

[. . . ] : : : : INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Recording starts when the IC recorder detects sound and pauses when no sound is heard, eliminating recording during soundless periods. (Items shown in the playback/ stop mode) ELAPSE*: Elapsed playback time of one message REMAIN: Remaining time of one message REC DATE: Recorded date and time Sets the DPC (Digital Pitch Control) function. When you set the DPC switch to "ON, " you can adjust the speed of the playback in a range from +200% to -75%. Set the speed by 10% for + setting and by 5% for ­ setting. ­30%* VOR DISPLAY DPC 0 GB Menu items EFFECT Settings (*: Initial setting) Sets whether to emphasize bass sound during playback. OFF*: The EFFECT function does not work. BASS2: The bass sound is emphasized even more. Note EASY SEARCH When playing back messages using a speaker, the EFFECT function does not work. PLAY MODE Sets the easy search function. OFF*: The easy search function does not work. When you press or , a message will be moved forward or backward. ON: You can go forward for about 10 seconds by pressing and go back for about 3 seconds by pressing . This function is useful when attempting to locate desired point in a long recording. MIC IN*: Select when you record messages using an external microphone. AUDIO IN: Select when you record using other equipment. GB Menu items Settings (*: Initial setting) DATE & TIME Sets the clock. AUTO*: When the IC recorder is connected to a computer that is running the Digital Voice Editor, the clock will be automatically adjusted according to that computer. MANUAL: You can set the clock by setting year, month, day, hour, and minute in sequence. FORMAT Sets the formatting of the drive after "ERASE ALL DATA?" has been displayed. YES: The drive will be formatted. Utilizing the Menu Function Note Use the IC recorder formatting function to format the memory. If you format the IC recorder using your computer, the sound may be interrupted unexpectedly and the recording time may be shortened. GB Menu items Settings (*: Initial setting) USB CHARGE Sets whether batteries will be charged using a USB connection or not. OFF: The batteries will not be charged. Note V-UP LEVEL If you use a USB AC adaptor (not supplied) to connect the IC recorder to the AC outlet, you can charge batteries regardless this setting. When the V-UP switch is set to "ON, " set the sound level to be amplified so that the inaudible low-level part will become more audible. MAX*: You can adjust the "V-UP LEVEL" more effectively. MID: You can adjust the "V-UP LEVEL" less finely. GB Using the IC Recorder with Your Computer Using the Supplied Digital Voice Editor Software What You Can Do Using the Digital Voice Editor Software The Digital Voice Editor software allows you to transfer the messages to your display monitor, to save them on your computer's hard disk, and to play back and edit them. Transferring the messages recorded on the IC recorder to your computer Saving the messages on your computer's hard disk. [. . . ] GB You cannot divide a message. You cannot display MP3 files in order. Troubleshooting You cannot make the A-B repeat setting. You cannot enter lowercase characters. Addtional Information Recording with Other Equipment To (headphone) jack * Optional audio connecting cables (not supplied) To the IC recorder To the other equipment RK-G139 Stereo Mini-plug mini-plug (monaural) (without resistor) (without resistor) RK-G136 Stereo Stereo mini-plug mini-plug (without resistor) (without resistor) Tape recorder, etc. To record the sound of the IC recorder with other equipment, connect the (headphone) jack of the IC recorder to the audio input connector (minijack, stereo) of other equipment using an audio connecting cable*. 0 GB Using a USB AC Adaptor (not supplied) 1 Connect the USB cable supplied to the USB connector of the IC recorder. AC outlet. 2 Connect a USB AC adaptor (not 3 Connect the USB AC adaptor to an While the batteries are charging, "CONNECTING" and the charging indicator are displayed in an animation. When the charging indicator indicates " , " charging is completed. 4 hours*) When you use the IC recorder for the first time, or after you have not used the IC recorder for a certain time, it is recommended that you charge the batteries repeatedly until " " is displayed. [. . . ]