User manual SONY VAIO VGN-CS390DDB

[. . . ] BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE SOFTWARE, OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. SONY CANNOT WARRANT THAT THE FUNCTIONS DESCRIBED IN THIS GUIDE WILL BE UNINTERRUPTED OR ERROR-FREE. SONY ALSO ASSUMES NO RESPONSIBILITY, AND SHALL NOT BE LIABLE FOR ANY DAMAGES TO, OR VIRUSES THAT MAY INFECT, YOUR COMPUTER EQUIPMENT, OR OTHER PROPERTY ON ACCOUNT OF YOUR ACCESS TO, USE OF, OR BROWSING IN ANY DESCRIBED WEB SITE, OR YOUR DOWNLOADING OF ANY MATERIALS, DATA, TEXT, IMAGES, VIDEO, OR AUDIO FROM ANY DESCRIBED WEB SITE. WEB SITE INFORMATION IS OBTAINED FROM VARIOUS SOURCES AND MAY BE INACCURATE. [. . . ] The drop-down tree displays all available network adapters. Device Manager 5 Double-click the network adapter that connects the computer to RoomLinkTM. The network adapter's Properties dialog box appears. Network Adapter Properties A Power Management tab should be available for the selected network adapter. If more than one network adapter is listed, select the device that has the Power Management tab available in the Properties dialog box. 63 RoomLink User Guide 6 From the Power Management tab, select the options, "Allow this device to bring the computer out of standby" and "Only allow management stations to bring the computer out of standby". Click OK. Network Adapter Properties (detail) 7 Close the Device Manager window, then click OK to close the System Properties dialog box. To change the system Standby setting 1 2 Click Start in the Windows taskbar and select Control Panel. Click Performance and Maintenance, then click Power Options. The Power Options Properties dialog box appears. 3 From the Power Schemes tab, in the sections, System standby and System hibernates, select an option from each drop-down list and click OK. Power Options Properties It may take a while to connect to a server that is in Standby or Hibernate mode. You may wish to select the option, Never, as this disables the Standby and Hibernate modes. 64 Setting Up RoomLink Setting Up RoomLink Specifying an IP address 1 On the Remote Commander® unit, press the MAIN MENU button. 2 Highlight Settings, then press the SELECT button. Settings screen Settings System Settings TV Settings Video Settings Photo Settings SELECT :Select RETURN :Return 3 Press / to highlight System Settings, then press the SELECT button. The System Settings screen appears. 65 RoomLink User Guide 4 Press the up or down arrow buttons to highlight IP Address, then press the SELECT button. The IP Address screen appears. IP Address screen Settings IP Address Obtain an IP address automatically (using router) Obtain an IP address automatically (not using router) Specify an IP address Current Settings: IP Address: Subnet Mask: 000 . 000 OK SELECT :Select RETURN :Return CANCEL 5 6 7 Press the up or down arrow buttons to highlight Specify IP Address, then press the SELECT button. The System Settings screen appears. 4 Press the up or down arrow buttons to highlight Factory Default, then press the SELECT button. The Default settings screen appears. Default settings screen Settings Default Settings Reset to default factory settings as following: - Startup Menu: - IP Address: - REC Mode: - Live Mode: - Video Server Confirmation: - Slide Show Interval: - Slide Show Repeat: OK SELECT :Select RETURN :Return Last function used Auto obtain an IP address Standard Standard No 5 sec On Cancel 5 Use / // to highlight OK, then press the SELECT button. All settings are reset to the original factory settings. Registering RoomLink and your VAIO computer RoomLinkTM enables you to restrict access to your VAIO® computer, accepting access from the network media receiver only. To register the network media receiver 1 On the Remote Commander® unit, press the MAIN MENU button. The Main Menu appears. 2 Highlight Settings, then press the SELECT button. The Settings screen appears. 69 RoomLink User Guide 3 Press the up or down arrow buttons to highlight System Settings, then press the SELECT button. The System Settings screen appears. 4 Press the up or down arrow buttons to highlight Device registration, then press the SELECT button. The Device registration screen appears. Device registration screen Settings Registration This device may be required to register to a server when accessing the services. Please verify your server settings enable this device to access the services. Please refer to the user manual for detailed information. Register this device to a server on the network. Device ID:00:00:fe:00:00:33 OK SELECT :Select RETURN :Return Cancel 5 Press the direction arrow buttons to highlight OK, then press the SELECT button. The Registration in process screen appears. If the registration of RoomLinkTM and the VAIO® computer are cancelled, you need to begin the registration again. 70 Setting Up RoomLink To register RoomLink to your VAIO computer 1 2 Click Start on the Windows® taskbar, select All Programs. Point to VAIO Media, point to Server Administration, and click Console. [. . . ] This support resource offers support on a variety of topics, enabling you to locate specific information. Quick Reference Guide -- Provides information to help evaluate your home computing environment. This quick reference also provides quick and easy instructions to set up your RoomLink, VAIO® computer, and TV. Your VAIO® computer is supplied with these support options: VAIO® Computer User Guide --Contains information on the hardware and preinstalled software applications included with your system. To access the online manual: 1 2 Click Start in the Windows taskbar, then click Help and Support. [. . . ]