User manual SONY VAIO VGN-CS390DEB

[. . . ] Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. [. . . ] HD Radio technology is developed and licensed by iBiquity Digital Corporation and supported by the leaders of the broadcasting, consumer electronics and automotive industries. iPod nano 3rd generation (video) iPod touch iPod classic Using the remote commander Common buttons that appear on both the remote commander and the unit control the same functions. ALARM button Press to set the alarm to "ON" or "OFF. " Press and hold for 2 seconds to enter "ALARM TIME SET. " TONE button To set the tone directly. HD SCAN button The selected band is scanned, and receivable HD Radio stations are played for 3 seconds in order of frequency. SCAN button The selected band is scanned, and receivable radio stations are played for 3 seconds in order of frequency. BRIGHT button To adjust the brightness of the display. Troubleshooting Should any problem persist after you have made the following checks, consult your nearest Sony dealer. A broadcast is received in analog only, even though the area is within HD Radio reception. · Depending on the conditions, if the incoming signal strength is too weak or unstable, the HD indicator will not flash or light up. In that case, the HD Radio broadcast will be received as an analog signal. The radio or iPod alarm is activated but no sound comes on at the preset alarm time. · Make sure the iPod is securely connected. The iPod cannot be operated with this unit. In HD scan, HD Radio stations are scanned. Note The display item differs depending on the content of a broadcast or the station. Go back to the previous menu Select a menu item or a track for playback Execute the selected menu or begin playback The Tag indicator starts blinking and the unit starts retrieving the song information. After getting the song information, the unit starts saving the data and "Tagged" appears in the display during the save. The Tag indicator goes off after the unit completes saving the song information. The Tag indicator lights up again at the beginning of the next song. Notes If the song information is not included in the HD Radio station broadcast, the Tag indicator does not light up. 10 seconds maximum to retrieve song information. If the AC power cord is unplugged during song information retrieving, the information will disappear. If Tag is pressed right after the beginning of a song, the unit may retrieve the information of the previously broadcast song as well as the current song. If Tag is pressed right before the ending of a song, the unit may retrieve the information of the current song and the next broadcast song as well. The maximum number of tagged songs that you can save to this unit is 50. If you press Tag when 50 tagged songs are already saved, "Storage Full" appears in the display and retrieving of song information cannot be completed. 4 Press SEL or to adjust "TREBLE, " 5 Press SEL or to adjust "BASS, " then Tips The adjustable range of "TREBLE" and "BASS" is from ­6 to +6. [. . . ] Adjust the volume using VOLUME + or ­. ­ Press ENTER on the unit or remote commander. ­ Press SCAN or HD SCAN on the remote commander. Field strength level indicator Preset number Band Station name Name of station currently tuned in. Frequency Text information Text information transmitted from station. Current time BRIGHTNESS: The brightness of the display is selected from "HIGH, " "MIDDLE" or "LOW. " CONTRAST: The contrast of the display can be adjusted by 11 levels. [. . . ]