User manual SONY VAIO VGN-CS390JKJ

[. . . ] Other versions may not comply with FCC technical regulations. Declaration of Conformity Trade Name Model Responsible Party Address SONY ICD-UX70/UX80 Sony Electronics Inc. 16530 Via Esprillo, San Diego, CA 92127 USA Telephone Number : 858-942-2230 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. : : : : INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] ROCK: Emphasizes high and low ranges for a powerful sound. JAZZ: Emphasizes high ranges for a lively sound. BASS2: The bass sound is emphasized even more. OFF*: The EFFECT function does not work. Note EASY SEARCH When playing back messages using a built-in speaker, the EFFECT function does not work. Utilizing the Menu Function Sets the easy search function. ON: You can go forward for about 10 seconds by pressing and go back for about 3 seconds by pressing . This function is useful when attempting to locate desired point in a long recording. OFF*: The easy search function does not work. When you press or , a message will be moved forward or backward. GB Menu items PLAY MODE Settings (*: Initial setting) Sets the playback mode. 1 FILE: When a message is played back, the IC recorder stops at the beginning of the next message. FOLDER*: Messages in one folder are played back continuously. ALL: All messages are played back continuously. The IC recorder is recognized by the computer as soon as the connection is made. While the IC recorder is connected to the computer, "CONNECTING" is displayed in the display window of the IC recorder. Tip If the IC recorder cannot be connected to the USB connector of your computer directly, use the supplied USB connection support cable. USB connection support cable (supplied) Computer IC recorder To USB connector 2 GB Notes If you connect more than two USB devices to your computer, normal operation will not be guaranteed. Use of this IC recorder with a USB hub or a USB connection support cable other than the supplied cable is not guaranteed. A malfunction may occur depending on the USB devices connected at the same time. Before connecting the IC recorder to the computer, make sure that the battery is inserted in the IC recorder. It is recommended that you disconnect the IC recorder from the computer when you are not using the IC recorder connected to the computer. Using Voice Recognition Software When voice recognition software (not supplied) is installed on your computer, you can transcribe a message into a text file. Introducing the voice recognition software Dragon NaturallySpeaking is a speechrecognition software application that allows you to recognize and transcribe your recorded voice in a message and convert it into a text file. For details on Dragon NaturallySpeaking, refer to the operating instructions supplied with Dragon NaturallySpeaking. For information on using Dragon NaturallySpeaking, refer to the documentation supplied with the software. For the latest version and information on the availability of Dragon NaturallySpeaking in each region, please refer to the following home page: http://www. nuance. com Disconnecting the IC recorder from your computer Follow the procedures below; otherwise, data may be damaged. Utilizing Your Computer 1 Make sure that the operation indicator is not flashing. 2 Disconnect the IC recorder from the USB connector of the computer. GB Notes You can use the transcribing feature only when you have installed Dragon NaturallySpeaking Select or Professional Edition (not supplied) on your computer. To install Dragon NaturallySpeaking, your computer should meet the specified system requirements. You can transcribe the following messages saved in your IC recorder or on your computer; ST, STSP, STLP or SP recording mode messages (MP3 files) 44. 1/16/11 kHz 16-bit WAV files saved on your computer You cannot transcribe a message recording the voices of more than one person. Creating a user file adapted to your recorded speech (Training) What is "Training"? Before you can transcribe recorded messages using Dragon NaturallySpeaking, you must create a user file specifically adapted to the sound of your recorded speech. [. . . ] While a USB AC adaptor (not supplied) is being used, the remaining battery indicator does not appear in the display window. Precautions On power Operate the unit only on 1. 5 V or 1. 2 V DC. Use one LR03 (size AAA) alkaline battery or one NH-AAA rechargeable battery. Do not operate the unit while driving, cycling or operating any motorized vehicle. Do not leave the unit in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. [. . . ]