User manual SONY VAIO VGN-FW490JFH

[. . . ] MSAC-US70) Depending on the adaptors, more system requirements may be needed. We do not recommend the use of a floppy disk adaptor for "Memory Stick". *2 You need the USB connector to connect your IC recorder equipped with a USB connector. You also need the connector to use the Memory Stick Reader/Writer (ex. [. . . ] You can select SP and LP recording modes. · DVF file [TRC: for ICD-Px8 series] (Digital Voice File/file extension: *. dvf) Monaural sound file format used in recording messages on the Sony IC recorder ICD-Px8 series equipped with a USB connector. You can select SP and LP recording modes. · DVF file [TRC: for ICD-Px7 series] (Digital Voice File/file extension: *. dvf) Monaural sound file format used in recording messages on the Sony IC recorder ICD-Px7 series equipped with a USB connector. · MSV file [LPEC] (Memory Stick Voice file/file extension: *. msv ) Monaural sound file format used in recording messages on the Memory Stick IC recorder ICDMS515 and ICD-S series. You can select SP and LP recording modes. · MSV file [LPEC: for ICD-BM series] (Memory Stick Voice file/file extension: *. msv) Sound file format used in recording messages on the Sony Memory Stick IC recorder ICD-BM series. You can select ST (stereo), SP and LP recording modes. · MSV file [ADPCM] (Memory Stick Voice file/file extension: *. msv) Monaural sound file format used in recording messages on the Memory Stick IC recorder ICDMS1. You can select SP and LP recording modes. · WAV file (WAV FILE [8/11/16kHz, 16 bit, monaural] [44. 1kHz, 16 bit, stereo] file/file extension: *. wav) PCM 8/11/16kHz, 16 bit monaural, or 44. 1kHz 16 bit stereo sound file used in recorded sound in standard Windows application software. · The number of folders differs depending on the IC recorder you are using. Troubleshooting Symptom "Digital Voice Editor" software cannot be installed. Starting the "Digital Voice Editor" 1 2 3 Turn on your computer and start Windows. Connect the IC recorder to your computer. Click [Start], and select [Programs], [Sony Digital Voice Editor 2] and then [Digital Voice Editor 2]. The "Digital Voice Editor" Software starts up and the main window appears. The data in the IC recorder or the "Memory Stick" is loaded and the message folders and message files are displayed in the IC Recorder message pane. You can save the messages as sound files on your computer's hard disk. There are three ways of saving messages: · Saving messages automatically (ICD-SX/ST/P/BM series only) · Saving a message by a drag-and-drop operation · Saving by specifying the file type and file name (For details, see the online help. ) Notes · The following characters cannot be used in a file name: \ / : *?"<>| · When a message with the same file name exists, the dialog box appears to ask you if you wish to replace the existing file. If you wish to replace the file, click [Yes]. If you wish to change the file name, click [No]. · When a message is saved in the computer's hard disk, its alarm setting will be cancelled. Saving messages by a drag-anddrop operation Remedy ·The free disk or memory space on the computer is too small. ·You are trying to install the software into the operating system that the "Digital Voice Editor" does not support. ·In Windows® XP Professional/Home Edition, you log on as a user name belonging to a user account with limitations. Make sure to log on as a user name with the "Computer administrator" user account. [. . . ] Display does not work during saving, adding, or deleting of messages. It takes too long to convert a file format. Adding Messages to the IC Recorder 1Menu bar/Toolbar You can access and execute the menu commands from the menu bar. The toolbar contains the buttons for common menu command tasks, providing quick way to do tasks. 2IC Recorder combo box You can select the IC recorder connected to the USB connector of your computer or the drive with the "Memory Stick" inserted. [. . . ]