User manual SONY VAIO VGN-FW490JFT

[. . . ] Since a newly recorded message is automatically added behind the last recorded message, you can start recording quickly without searching for the end of the last recording. e. g. Message 1 Message 2 Newly recorded message Blank space 1 Note on recording Noise may be recorded if an object, such as your finger, etc. , accidentally rubs or scratches the unit during recording. Press DISPLAY/MENU for more than 1 second until "MODE" appears in the display window. 1 Replacing the batteries Slide and lift the battery compartment lid. The battery indicator in the display window shows the battery condition. When flashes, replace the batteries with new ones. When flashes, the batteries are exhausted and the unit will stop operation. [. . . ] · No more recording can be made when 99 messages each have been recorded in a folder. · Due to the limitation of the IC recording system, this unit records in the minimum recording unit. If the length of each message cannot be divided by the minimum recording unit, the remaining recording time may decrease by more than the total length of the messages. 3 Set the time. 3 Set the minute. 1 Press DISPLAY/MENU for more than 1 second until "MODE" appears in the display window. go back to the beginning of the current message skip to the next message go back to previous messages/skip to succeeding messages 1 Press ­ . or >+ to select the digits of the hour. 2 Press ­ . or >+ to select "FOLDER" and press NxPLAY/STOP. Starting recording automatically in response to the sound -- Advanced VOR function When VOR (voice operated recording) is set to ON in the menu, recording starts when the recorder detects sound. ("VOR" is displayed in the display window. ) Locating quickly the point you wish to start playback (Easy Search) When EASY-S is set to "ON" in the menu, you can advance approx. This function is useful when locating a desired point in a long recording. ("EASY-S" is displayed in the display window. ) 4 Press NxPLAY/STOP at the time signal. The display will return to "SET DATE". 5 Press xSTOP to exit from the menu mode. If the unit is left unused for more than 3 seconds in the stop mode, the display will show the current time. * These operations are for when EASY-S (Easy Search function) of the menu is set to "OFF". 3 Press ­ . · You can adjust the playback volume with the VOL control. · If the alarm time comes during erasing, alarm will sound for 10 seconds after the erasing is finished and playback begins. · Alarm setting will not be canceled when the alarm playback finishes. To cancel alarm setting, see below. Turning off the Beep Sound A beep will sound to indicate that operation has been accepted. BEEP OFF: No beep sound will be heard except for the alarm and timer. BEEP ON: Using the "Digital Voice Editor" Software By connecting the IC recorder to your computer with the supplied USB cable, you can use the "Digital Voice Editor" software to do the following: · Saving the IC recorder messages on your computer's hard disk. · Transferring the PC messages back to the IC recorder. · Playing or editing the messages on your computer. · Sending a voice e-mail message using MAPI e-mail software. For the details, see the supplied "Digital Voice Editor 2" software operating instructions. 1 Erasing messages one by one When a message is erased, the remaining messages will advance and renumbered so that there will be no space between messages. Before erasing Message 1 Message 2 Message 3 Message 4 Message 5 1 2 Press DISPLAY/MENU for more than 1 second until "MODE" appears in the display window. [. . . ] and Canada only) Headphone (1) (excluding the U. S. A. , Canada and Europe) Carrying pouch (1) (excluding the U. S. A. , Canada and Europe) USB connecting cable (1) Application software (CD-ROM) (1) Optional accessories Electret Condenser Microphone ECM-DM5P, ECM-CZ10, ECM-Z60, ECM-TL1 (for telephone recording) Audio connecting cable RK-G64HG /RKG69HG (excluding Europe) Active speaker SRS-T88, SRS-T80 Your dealer may not handle some of the above listed optional accessories. Please ask the dealer for detailed information. Design and specifications are subject to change without notice. 2 3 i (earphone) jack 3 Press xSTOP to stop the recording. Press DISPLAY/MENU for more than 1 second until "MODE" appears in the display window. or >+ to select "MOVE" and press NxPLAY/ STOP. The destination folder indication flashes. To play back at the same time every day Notes · You cannot add or overwrite a recording if the remaining memory is not long enough. [. . . ]