User manual SONY VAIO VGN-FW520F

[. . . ] · Do not use this equipment on hospital premises. Doing so may cause medical devices to malfunction. · Do not use this equipment in an aircraft. Doing so could cause the aircraft's equipment to malfunction. [. . . ] You can use this automated service to request a list of available topics, and then select the topic that you want to receive. To contact the Sony fax-back service, call 1-877-760-7669. The Sony Customer Information Services Center offers information about your Wireless LAN Converter, Wireless LAN PC Card, and other Sony products that work with your computer. To contact the Sony Customer Information Services Center, call 1-877-760-7669. Open 24 hours/day, 7 days/week. Wireless LAN Converter (2. 4 GHz/5 GHz IEEE 802. 11a/b/g) Read This First Introduction The Wireless LAN Converter VAIO VGN-FW520F is designed to allow devices such as desktop computers or printers equipped with Ethernet connectors to become part of a wireless network. Documentation and Help This product is supplied with the following documentation and Help. Read This First (this document) Quick Start Guide Describes the necessary preparations and settings to connect to the Internet with the Wireless LAN Converter VAIO VGN-FW520F. VAIO VGN-FW520F 2004 Sony Corporation Printed in Japan WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Owner's Record The model number is located on the bottom of the Wireless Unit. The serial number is located behind the rear cover of the Wireless Unit. Record the serial number in the space provided below. Refer to them whenever you call your Sony dealer regarding this product. The shielded interface cable recommended in this document must be used with the equipment to comply with the limits for a digital device pursuant to Subpart B of Part 15 of the FCC Rules and Canadian ICES-003. Le câble d'interface blindé recommandé dans ce document doit être utilisé avec les appareils pour être conforme aux limitations des appareils numériques telles que spécifiées dans la norme NMB-003 du Canada. NOTE: The power outlet should be installed near the equipment and should be easily accessible. For customers in Canada · This class B digital apparatus complies with Canadian ICES-003. · Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. · To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. · The term "IC" before the equipment certification number only signifies that Industry Canada technical specifications were met. · The installer of this radio equipment must ensure that the antenna is located or pointed in such away that it does not emit an RF field in excess of Health Canada limits for general population. Refer to Safety Code 6, which can be obtained from the Health Canada Web site at http://www. hc-sc. gc. ca/rpb · This equipment is made for indoor use only. Pour les utilisateurs au Canada · Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. · L'utilisation de cet appareil est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l'utilisateur de cet appareil doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement de l'appareil. [. . . ] If this should happen, disconnect the Wireless LAN Converter from the converter or other device to which it may be connected, and discontinue operation for two to three hours. 1 Status indicator Indicates the status of the Wireless LAN Converter. Indicator color and lighting pattern White flashing (approx. intervals) 2 Specifications Power AC100 - 240 V, 50/60 Hz Using screws or nails, hang the unit to a wall. Red flashing (approx. intervals) Power consumption Approx. 5 W 0. 94 (24) Interfaces 100BASE-TX/10BASE-T (RJ-45) (automatic MDI/MDI-X detection) Maximum connection distance Line of sight, approx. [. . . ]