Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SONY VAIO VGN-NR490E/S. We hope that this SONY VAIO VGN-NR490E/S user guide will be useful to you.
Lastmanuals help download the user guide SONY VAIO VGN-NR490E/S.
Manual abstract: user guide SONY VAIO VGN-NR490E/SDATASHEET
Detailed instructions for use are in the User's Guide.
[. . . ] Before attaching the clamp E, clean the surface thoroughly. This system receives the driver's voice from the microphone. [. . . ] When it is noisy outside your car, shut the windows. Engine noise may also prevent the system from recognising the driver's voice. This microphone can receive sound from one direction only (directional microphone). Therefore it is important to install the microphone properly to ensure the driver's voice will be received. Be sure to leave some slack in the connecting cord between the plug and the cramper. Note that when the sun visor is lowered, the microphone will not receive the driver's voice. Remove the steering wheel column cover, and drill 2 mm diameter hole where you have marked. warm the mounting surface and the double-sided adhesive tape on the mounting hardware B to the temperature of 20°C to 30°C , and attach the mounting hardware onto the mounting surface by applying even pressure. Then screw it down with the supplied screw A. On the other side of the mounting surface to cover the protruding tip of the screw so that they will not interfere with the electrical cables, etc. After installing the steering wheel column cover, attach the rotary commander to the mounting hardware by aligning the four holes on the bottom of the rotary commander to the four catches on the mounting hardware and sliding the rotary commander until it locks into place as illustrated. Note If you are mounting the rotary commander to the steering wheel column, make sure that the protruding tip of the screw on the inner surface of the column do not in anyway hinder or interfere with the movement of the rotating shaft, operative parts of the switches or the electrical cables, etc. [. . . ] Note If you are mounting the rotary commander to the steering wheel column, make sure that the protruding tip of the screw on the inner surface of the column do not in anyway hinder or interfere with the movement of the rotating shaft, operative parts of the switches or the electrical cables, etc. After connecting, bundle up the connecting cord of the rotary remote with other connecting cords of the audio equipment by attaching the supplied cramper C. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY VAIO VGN-NR490E/S
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY VAIO VGN-NR490E/S will begin.
