User manual SONY VAIO VGN-NS140E

[. . . ] Before operating the TV, please read this manual thoroughly and retain it for future reference. The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. Trademark information is a registered trademark of the DVB Project. [. . . ] 2 Press G/g to select "Network". 3 Press F/f to select the desired Widget to be displayed or simply select "AppliCast" icon to display your preferred list of Widgets. Using Home Network Features 4 Follow the instruction on the Widget. To return to single picture mode Press RETURN. To Add or remove Widgets in AppliCast You can add to or remove from the Widget list. From Widget: 5 While you are displaying the Widget, press OPTIONS. 6 Select "Add to AppliCast" or "Remove from AppliCast". Up to 30 Widgets can be registered in "AppliCast". From "Network" in the Home Menu: 7 Follow STEP1-2 above. 8 Press F/f to select the desired Widget, then press OPTIONS. 9 Follow STEP6. (Continued) 29 GB Enjoying Photo/Music/ Video Files via the Network You can enjoy photo/music/video files on the server easily by selecting an icon on the Home Menu of the TV. manual for the network device being used. Even files conforming to one of the file formats given above cannot be played in some cases. · The file name and folder name support only English. 1 Press HOME. 2 Press G/g to select "Photo", "Music", or "Video". To enjoy photographs, music and videos on the TV screen by operating devices ­ Renderer Renderer is a feature for playing photo, music and video files stored in network devices (digital still cameras, mobile phones, etc. ) on the TV by operating the controller device in question. To use this feature, a renderercompatible device such as a digital still camera or mobile phone is required as the controller. Refer as well to the instruction manual supplied with the controller. 3 Press F/f to select a server, then press . The file or folder list appears. . 5 Select "Server Display Settings", then Using Home Network Features 6 Select an item, and press . When you select "DHCP (DNS automatic)" 6 Select the server you want to display on the Home Menu, then press Go to step 7. When you select "DHCP (DNS manual)" 7 Select "Yes", then press . If you cannot connect to your home network The TV can check if the server is being correctly recognised. Set "Primary DNS"/"Secondary DNS" using F/f/g and the number buttons. When you select "Manual" Set the following items using F/f/g and the number buttons. · IP Address · Subnet Mask · Default Gateway · Primary DNS/Secondary DNS If your ISP has a specific proxy server setting 1 Press HOME. 2 Press G/g to select "Settings". 3 Press F/f to select "Network Settings", then press . . 4 Select "Server Diagnostics", then press 5 Select "Yes", then press . The server diagnostic starts. When the server diagnostic is complete, the diagnostic result list appears. Press OPTIONS, then press F/f to select "Proxy Set-up" and press . 8 Press g to select "Test", then press . 9 Press G/g to select "Yes", then press . The network diagnostic starts. When the message "Connection successful. " appears, press RETURN repeatedly to exit. z If "Connection successful. " does not appear, see "Troubleshooting" (page 52). 6 Select the server you want to confirm, then press . The diagnostic results of the selected server appear. If the diagnostic results indicate a failure, look up the possible causes and what to do, and check connections and settings. [. . . ] Only a few icons appear under · This is normal when internet connection is not available. the "Network" in the Home You can use three pre-installed Widgets properly. Widgets, please check that the LAN cable and/or mains lead/AC power cord of the router/modem has not become disconnected. (*) You have been using · Check that the LAN cable and/or mains lead/AC power cord of the registered Widgets, but now router/modem has not become disconnected. [. . . ]