User manual SONY VAIO VGN-NS190J/L

[. . . ] For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. S Any functions related to Digital TV ( ) will only work in countries or areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are broadcast or where you have access to a compatible DVB-C (MPEG2 and MPEG4 AVC) cable service. Please confirm with your local dealer if you can receive a DVB-T signal where you live or ask your cable provider if their DVB-C cable service is suitable for integrated operation with this TV. S The cable provider may charge an additional fee for such a service and you may be required to agree to their terms and conditions of business. [. . . ] " Press F/f to select the GPS unit, then press . Using BRAVIA Sync with Control for HDMI The control for HDMI function enables the TV to communicate with the connected equipment that is compatible with the function, using HDMI CEC (Consumer Electronics Control). For example, by connecting Sony equipment that is compatible with control for HDMI (with HDMI cables), you can control them together. Be sure to connect the equipment correctly, and make the necessary settings. control for HDMI · Automatically turns the connected equipment off when you switch the TV to standby mode using the remote. Automatically turns the TV on and switches the input to the connected equipment when the equipment starts to play. If you turn on a connected audio system while the TV is on, the sound output switches from the TV speaker to the audio system. After displaying the menu, you can operate the menu screen by using F/f/G/g and . ­ OPTIONS to display "Device Control", then select options from "Menu", "Options", and "Content List" to operate the equipment. The control for HDMI settings must be set on both the TV side and connected equipment side. To connect the equipment that is compatible with control for HDMI Connect the compatible equipment and the TV with a HDMI cable. Picture quality may appear coarse when using (Photo) because images may be enlarged depending on the file. Also, images may not fill the entire screen depending on the image size and aspect ratio. Some photo files may take some time to be displayed when using (Photo). To play files that are received from a network device, they need to conform to one of the following file formats. Depending on the network device, the file format may be converted before transfer. In such cases, the file format resulting after conversion is used for playback. for details , see the instruction manual for the network device being used. Even files conforming to one of the file formats given above cannot be played in some cases. To enjoy photographs and music on the TV screen by operating devices ­ Renderer "Renderer" is a feature for playing photo files and music files stored in network devices (digital still cameras, mobile phones, etc. ) on the TV by operating the controller device in question. To use this feature, a renderercompatible device such as a digital still camera or mobile phone is required as the controller. [. . . ] ­ Specify the IP address of the router if you do not know the DNS of your Internet provider. The server cannot be found, a · Once server settings are changed, turn the TV off and on by pressing 1 list cannot be retrieved, and on the TV. If security software is installed on the server, be sure to allow connections from external devices. The load on the PC may be too high or the server application may become unstable. [. . . ]