User manual SONY VAIO VGN-NS210E/S

[. . . ] This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9. To reduce fire or shock hazard, do not expose the unit to rain or moisture. The use of optical instruments with this product will increase eye hazard. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. [. . . ] Set your local area using v/V when using your camcorder overseas. Refer to the world time difference on page 97. You can change this setting without stopping the clock. Set to [ON] to move the time forward 1 hour. You can select the language to be used on the LCD screen. Your camcorder offers [ENG[SIMP] ] (simplified English) for when you cannot find your native tongue among the options. The camcorder is automatically turned off when you do not operate your camcorder for more than approximately 5 minutes. If the item is not on the screen, touch v/V to change the page. The camcorder is not automatically turned off. When you connect your camcorder to a wall socket, [A. (HOME MENU) t page 60 (OPTION MENU) t page 71 The default settings are marked with B. 34) moves to the top of the T (telephoto) side automatically and allows recording subjects at a close distance as follows; DCR-DVD106E/DVD108E/DVD109E/ VAIO VGN-NS210E/S down to about 43 cm (17 in. ) DCR-DVD306E/DVD308E/DVD708E down to about 38 cm (15 in. It is easier to focus on the subject by moving the power zoom lever towards T (telephoto) to adjust the focus, then towards W (wide angle) to adjust the zoom for recording. When you want to record a subject at close range, move the power zoom lever to W (wide angle), then adjust the focus. The focal distance information (the distance at which the subject is focused on, for when it is dark and hard to adjust focus) appears for a few seconds in the following cases. When recording a distant subject, focusing may be difficult and can take some time. To return the setting to automatic exposure, touch [AUTO] t [END] in step 1. You can fix the brightness of an image manually. Adjust [EXPOSURE] when the subject is too bright or too dark relative to the background. You can record images effectively in various situations with the [SCENE SELECTION] function. b AUTO Select this to automatically record images effectively without the [SCENE SELECTION] function. [. . . ] You cannot select some buttons on the LCD screen using b / B / v / V. Displays the date and time or camera setting data of the recorded images when you press this during playback. 1 While pressing on the tab, inset your fingernail into the slit to pull out the battery case. 2 Place a new battery with the + side facing up. [. . . ]