User manual SONY VAIO VGN-NS225J/S

[. . . ] Your telephone must be operated at temperatures ranging from 5°C and 45°C. Only use the supplied power adapter, connect it to the base socket according to the installation instructions provided in this booklet and the indications on the identification label affixed to it (voltage, current, electric network frequency). As a precaution, in case of danger, the mains adapters act as a disconnecting mechanism for the 230V power supply. They should be placed near the device and should be easily accessible. [. . . ] Transfering an external call to another handset registered on same base 1. When the user answers, you can announce the call. To switch from one call to another, press and hold down the signal is heard. If the called handset does not answer, press Making conference calls (3-way conversation) You can connect one external call to two handsets registered at the base station. Press and hold key, until an aural signal is heard to start a three-way conference. Two outside calls Taking a second call while you are already on line During a call, a beep is emitted by your operator to inform you that a second call is on hold. A screen displays the number of this second caller on hold. Press then the key Your first contact is put on hold and you can talk with the second caller. Making a second call while you already on line During a conversation, press then dial the number to be called. The call in process is then put on hold and you can take the second call back. Switching from one call to the other To switch from one call to the other, press then the key . Press menu, select "personal set " using the or key, Press menu. Using the or key, select "language ". Press menu key to confirm your selection. Select "advanced set" using the or key, press menu. Press menu key to confirm your selection. You will need it to change certain settings. This function allows you to register a new handset on your base. Select "advanced set " using the or key, press menu. Using the or key, select "registration ". Enter the 4 digit base master PIN code (default 0000). Press and hold key for 5 seconds (after 1 minute if no Handset has started association process the base goes back to standby). [. . . ] In the case that no proof of purchase is enclosed, the SONYCOM repair centre will use the production date as its reference for establishing the guarantee status of the product. Apart from all legal obligatory rules, SONYCOM, do not give any Guarantee, either implicit or explicit which is not set force in the present section, and can not be held responsible for any direct or indirect, material or immaterial damage, either in or out of the frame of the present guarantee. If any provision of this guarantee shall be held to be in whole or in part invalid or illegal due to an obligatory rule applicable to consumers pursuant to their national legislation, such invalidity or illegality shall not impair or affect the remaining provisions or parts of this guarantee. This guarantee does not affect the Customer statutory rights. [. . . ]