User manual SONY VAIO VGN-NS225J/T

[. . . ] To pair your mouse with a new Mac: 1 Slide the On/off switch on the bottom of your mouse to turn it on (see page 4). 2 Turn on your Mac and follow the onscreen instructions in Setup Assistant. 3 Once your mouse is paired with your Mac, use Software Update again to make sure you have the latest software installed (see page 3). Use your existing USB mouse to pair your Apple Magic Mouse with your Mac. [. . . ] To replace a USB mouse: 1 Slide the On/off switch on the bottom of your Apple Magic Mouse to turn it on (see page 4). 4 Select your mouse, and then follow the onscreen instructions to pair it with your Mac. After you pair your Apple Magic Mouse with a Mac, you can pair again with a different Mac. To do this, remove the existing pairing, and then pair the mouse again. To pair with a different Mac: 1 Choose Apple (K) > System Preferences, and then click Bluetooth. To pair your mouse again, see "Replacing a USB Mouse" on page 5. Your Apple Magic Mouse has a seamless MultiTouch surface you can use to right-click, leftclick, scroll, and swipe. To set up Multi-Touch gestures and customize the way your mouse works, choose Apple (K) > System Preferences, and then click Mouse. Your Apple Magic Mouse comes with two AA batteries installed. You can use alkaline, lithium, or rechargeable AA batteries in your mouse. Dispose of batteries according to your local environmental laws and guidelines. If the interference stops, it was probably caused by the computer or one of the peripheral devices. If your computer system does cause interference to radio or television reception, try to correct the interference by using one or more of the following measures: · Turn the television or radio antenna until the interference stops. Move the computer to one side or the other of the television or radio. Move the computer farther away from the television or radio. Plug the computer into an outlet that is on a different circuit from the television or radio. (That is, make certain the computer and the television or radio are on circuits controlled by different circuit breakers or fuses. ) If necessary , consult an Apple Authorized Service Provider or Apple. See the service and support information that came with your Apple product. Important: Changes or modifications to this product not Could void the EMC compliance and negate your authority to operate the product. This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables (including Ethernet network cables) between system components to reduce the possibility of causing interference to radios, television sets, and other electronic devices. [. . . ] Turn the television or radio antenna until the interference stops. Responsible party (contact for FCC matters only): Apple Inc. This device complies with RSS 210 of Industry Canada. Caution: Modification of this device may result in hazardous radiation exposure. [. . . ]