User manual SONY VAIO VGN-NS230E/S

[. . . ] Trademarks SONY, the SONY logo, ProSafe, Smart Wizard, and Auto Uplink are trademarks or registered trademarks of SONY, Inc. microsoft , Windows , Windows NT , and Vista are registered trademarks of Microsoft Corporation. Other brand and product names are registered trademarks or trademarks of their respective holders. Statement of Conditions To improve internal design, operational function, and/or reliability, SONY reserves the right to make changes to the products described in this document without notice. [. . . ] Enter the name or IP address of the outgoing SMTP mail server of your ISP (such as mail. Enter the e-mail address where you want to send the alerts and logs. Use a full e-mail address, such as ChrisXY@myISP. Select this check box if you need to log in to your SMTP server to send E-mail. If you select this feature, you must enter the user name and password for the mail server. Tip: If you cannot remember this information, check the settings in your email program. Specify when you want the alerts and logs to be sent: • Send alert immediately. Select the corresponding check box if you would like immediate notification of a significant security event, such as a known attack, port scan, or attempted access to a blocked site. €¢ Send logs according to this schedule. Specifies how often to send the logs: Hourly, Daily, Weekly, or When Full. Specifies which day of the week to send the log. Chapter 4: Managing Your Network | 41 Mobile Broadband Wireless-N Router VAIO VGN-NS230E/S Tip: Be sure to change the router default password to a very secure password. The ideal password should contain no dictionary words from any language, and should be a mixture of letters (both upper-case and lower-case), numbers, and symbols. Your password can be up to 30 characters. Net in the address field of your Internet browser. Enter admin for the user name and your password (or the default, password). Under the Advanced heading, select Remote Management: 3. Specify which external addresses will be allowed to access the router’s remote management. For security, restrict access to as few external IP addresses as practical: • • To allow access from any IP address on the Internet, select Everyone. To allow access from a range of IP addresses on the Internet, select IP address range. Enter a beginning and ending IP address to define the allowed range. To allow access from a single IP address on the Internet, select Only This Computer. [. . . ] 4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. This device may not be used for setting up outdoor radio links in France and in some areas the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 – 2483. For detailed information the end-user should contact the national spectrum authority in France. [. . . ]