User manual SONY VAIO VGN-NS330J

[. . . ] · When this crossed-out wheeled bin symbol is attached to a product, it indicates that the product is covered by the European Directive 2002/96/EC. · Become informed about your local separate collection system for electrical and electronic products. · Act according to your local rules and do not dispose of old products with normal household waste. The correct disposal of old products will help prevent potential negative consequences for the environment and human health. [. . . ] Formatting on the Voice Tracer uses the correct file system and automatically creates the required folders. Table of contents Get started 8 5 Record D Notes · Set the desired voice activation function and recording mode before starting recording (see chapter 8, Customize settings on page 14 for more information). · Make a test recording to make sure that the Voice Tracer settings are correct. · Press and hold f during recording to display the remaining recording time. · Press b during recording to create a new file. · The maximum number of files in each folder is 99, for a total capacity of 396 files (99 files x 4 folders). · If the recording time exceeds the available capacity or the number of files reaches 396, recording stops and FULL will be displayed. Delete a few recordings or move them to a computer. · Do not remove the battery when recording is in progress. · If you are to start a long recording session, replace the batteries before you begin. Please note the instructions in this section when you make the first recording with your Voice Tracer!Record with the built-in microphone 1 Press the INDEX/a button while the recorder is stopped to select the desired folder. 2 Press the g button to start recording. Repeat a sequence 1 To repeat or loop a sequence in a file, press the INDEX/a button at the chosen start point. 1 on the display flashes and the loop · The symbol 2 appears. symbol 2 Press the INDEX/a button again at the chosen end point. 3 Press the j/DEL button to stop playback or press the INDEX/a button to resume normal playback. 1 2 Table of contents Playback 12 7 Delete Deleting files and index marks 1 Press the INDEX/a button while the recorder is stopped to select the desired folder. 2 Press and hold the j/DEL button for one second or longer. 3 Press the h or b button to select a delete option: Icon Description Delete a single file. 5 Press the h or b button to select the file, the folder or the file containing the index marks to be deleted. D Note The files will be automatically renumbered. Table of contents Delete 13 8 Customize settings Icon/ Display Option On Off VA Description Voice-activated recording is a convenience feature for hands-free recording. When voiceactivated recording is enabled, recording will start when you begin speaking. When you stop speaking, the recorder will automatically pause recording after three seconds of silence, and resume only when you begin speaking again. Dynamic emphasis on quiet passages to improve the intelligibility of quiet voices. [. . . ] As a part of ongoing product maintenance, the firmware is revised and errors are corrected. It is possible that a newer version (an "update") of the firmware has been issued since you purchased the Voice Tracer. In this case you can easily update your recorder to the latest version. 1 Connect the Voice Tracer to your computer using the supplied USB cable. [. . . ]