User manual SONY VAIO VGN-NW220F/W

[. . . ] This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of HP. Box 4010 Cupertino, CA 95015-4010 USA Copyright © 2004­2005 Hewlett-Packard Development Company, L. P. registered trademarks of Microsoft Corporation. [. . . ] If you are using an HP subwoofer, insert the subwoofer audio plug into the right speaker subwoofer connector -. Connect one end of the speaker DC power cable w to the right speaker DC power connector q. Connect the other end of the cable to the DC power connector 4 on the f monitor. As needed, connect headphones to the headphone jack connector (not shown) on the right speaker. SERIAL ETHERNET TV-OUT VID/AUD S-VID IN LINE IN IR FM TV 3 8 4 12 9 10 11 Connecting the f monitor speakers 3­18 User's Guide Setting Up the Monitor Item 3 4 Description Speaker audio cable at computer connector Speaker DC power connector and DC power cable w (connects to right speaker DC power q connector) Right speaker with Control knob 9, and connectors for subwoofer - and speaker DC power q Headphone connector (right speaker) 8 Not shown Connecting the Power Cable 1. Read the warning below. Å WARNING: To reduce the risk of electric shock or damage to your equipment: Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet. Be sure that the grounded power outlet you plug the power cord into is easily accessible to the operator and located as close to the equipment as possible. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Select Install INF and ICM Files in the CD menu. After the files have been installed, restart the computer. Ensure that the proper resolutions and refresh rates appear in the Display Control Panel settings. Refer to your Windows operating system documentation for more information. to install the monitor INF ICM You may needfrom the CD, digitally signedan installationorerror. files manually in the event of Refer to the "INF and ICM Readme" file on the CD for instructions (in English only). 4­2 User's Guide Operating the Monitor Downloading from the World Wide Web To download the latest version of INF and ICM files from the HP Support Web site: 1. Refer to: http://www. hp. com/support Select your country/region. Follow the links for your monitor to the support page. Ensure your system meets the requirements. Download the software by following the instructions. Using the Auto-Adjustment Function You can easily optimize the screen performance for the VGA input by using the Auto/Select button on the monitor and the auto-adjustment pattern software on the CD provided. Do not use this procedure if your monitor is using a DVI input (select models only). [. . . ] If you have questions about the type of power cord to use, contact your HP-authorized service provider. A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product. User's Guide B­9 Technical Specifications B­10 User's Guide C Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ]