User manual SONY VAIO VGN-NW238F/W

[. . . ] HP shall not be liable for technical or editorial errors or omissions contained herein. This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. Second Edition (January 2010) Document Part Number: 594300-002 About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. [. . . ] Figure 4-1 Auto adjustment setup test pattern 7. Press the Auto/OK button on the monitor panel to produce a stable, centered image. 18 Chapter 4 Operating the Monitor Front-Panel Controls Control buttons are located on the right front of the monitor: No. 1 Icon Power Description Turns the monitor on or puts it in standby or sleep mode. The Power button is located on the top or front of the monitor depending on the model. Adjusts the volume level. 2 3 Menu 4 5 6 7 8 Source Chooses video input source from the computer Navigates backward through the OSD menu and decreases adjustment levels. Navigates forward through the OSD menu and increases adjustment levels. Auto OK Auto-adjusts the display to the ideal setting when the OSD is not active / Enters the selected option. Enters the selected option Front-Panel Controls 19 Using the On-Screen Display (OSD) An on-screen display is an image superimposed on a screen picture, commonly used by monitors, televisions, VCRs, and DVD players to display information such as volume, channel, and time. If the monitor is not already on, press the Power button to turn on the monitor. To access the OSD menu, press the Menu button. To navigate through the Main or sub-menu, press the + (Plus) button on the monitor's side panel to scroll up, or the ­ (Minus) button to scroll in reverse. Then press the Auto/OK button to select the highlighted function. NOTE: The menu moves to the top if you scroll down at the bottom of the selections. Selects the method on how displayed information on the monitor will be formatted. Select: Fill to Screen - image fills the entire screen and may look distorted or elongated because of nonproportional scaling of height and width. Fill to Aspect Ratio - image is sized to fit the screen and maintains proportional image. Clock Phase Horizontal Position Vertical Position Custom Scaling Sharpness (VGA only) Adjusts the screen image to look sharper or soft. Using the On-Screen Display (OSD) 21 Icon Main Menu Options Sub-menu Options Video OverDrive Description Reduces motion blur in video and fast moving games. Sets the OverDrive feature on or off; the default setting is Off. (select models) Displays the status of the Dynamic Contrast Ratio (DCR) setting. DCR automatically adjusts the balance between white and black levels to provide you with an optimal image. Select: On Off The factory default is On or Off, depending on the model. Dynamic Contrast Ratio OSD Control Horizontal OSD Position Adjusts the position of the OSD menu on the screen. Changes the viewing position of the OSD menu to the left or right area of the screen. Changes the viewing position of the OSD menu to the top or bottom area of the screen. Adjust to view the background information through the OSD. Sets the time in seconds that the OSD is visible after the last button is pressed. [. . . ] Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett Packard Company may void the user's authority to operate the equipment. Cables Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations. Declaration of Conformity for Products Marked with the FCC Logo (United States Only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. For questions regarding the product, contact: 38 Appendix C Agency Regulatory Notices Hewlett Packard Company P. [. . . ]