User manual SONY VAIO VGN-P610/N

[. . . ] THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR SONY REPRESENTATIVE FOR A COPY. The following information is for FCC compliance of Class B devices: The equipment described in this manual generates and may radiate radio-frequency energy. If it is not installed in accordance with Cisco's installation instructions, it may cause interference with radio and television reception. [. . . ] Settings--Opens the Settings options, including Contrast, Back Light, Language, Ringer, Time Format, and Date Format. Admin Setup--Opens Admin Setup. Cisco IP Conference Station 7936 Administration Guide 2-28 OL-4746-01 Chapter 2 Installing the Cisco IP Conference Station 7936 Using the Cisco IP Conference Station 7936 Using the Keyboard Commands The following keyboard commands are available for use on the Cisco IP Conference Station 7936. Keyboard Command **# **#** Accessible State In menu screens. In resting mode and two levels of menu screens. For example, you could use this keyboard command from the Main menu (first level) or from the Admin Setup menu (second level). This command restores the default configuration of the IP Conference Station. A confirmation screen is displayed before execution. This command displays a list of LCD tests. This command displays the MAC address of the IP Conference Station. Use this command to enable a Telnet connection to the phone. Telnet will be enabled until the phone is reset. See the "Default Settings" section on page 3-17 for additional information. The Change Passcode menu allows you to change the administrator password used on the phone. See the "Changing the Administrator Password" section on page 3-23 for additional information. The HTTP Port Change menu allows you to change the HTTP port. See the "Configuring the HTTP Port" section on page 3-14 for additional information. System Info--Access the System Information menu by following the procedure above and selecting System Information. The System Information menu allows you to view configuration information. See the "Verifying System Settings" section on page 3-3 for additional information. Verifying System Settings The IP Conference Station contains detailed information about its current system settings. This information is useful when troubleshooting or when making changes to any system settings. Cisco IP Conference Station 7936 Administration Guide OL-4746-01 3-3 Chapter 3 Verifying System Settings Configuring the Cisco IP Conference Station 7936 Timesaver You can also use the Cisco IP Conference Station 7936 web interface to view system settings. See the "Cisco IP Conference Station 7936 Web Interface" section on page 3-33. Follow these steps to verify system settings: Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Press the Menu button. [. . . ] Follow these steps to use Ping. Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Press the Menu button Press the Up or Down scroll button to select Admin Setup. Enter the administrator password (the default administrator password is **#) and then press the Enter softkey. Press the Up or Down scroll button to select Diagnostics, and then press the Select button. Select Ping and press the Select button. Cisco IP Conference Station 7936 Administration Guide 4-2 OL-4746-01 Chapter 4 Troubleshooting the Cisco IP Conference Station 7936 Other Troubleshooting Information Step 7 Use the dialing pad to enter the IP address of the device you want to ping. [. . . ]