User manual SONY VAIO VGN-SR129E/B

[. . . ] SONY700/92, SONY2392A and SONY2622A are trademarks of Hewlett Packard Company. IBM is a registered trademark of International Business Machines Corporation. Microsoft is a registered trademark of Microsoft Corporation. Tandem, NonStop and LXN are trademarks of Tandem Computers Inc. [. . . ] When set to Breakthrough, unshifted PF keys will function immediately when pressed if they have been assigned functions by application software. When set to As TX Prefix, the function of unshifted PF keys will be sent to the host before a block of data is transmitted. When set to As TX Suffix, the function of unshifted PF keys will be sent to the host after a block of data is transmitted. Send Key Effect Factory default: Immediate The setting of this option determines the effect of pressing the Enter key when sending data to the host. When Immediate is selected, data will be sent to the host immediately without waiting for permission to transmit. When Deferred is selected, a code will be sent to the host notifying it that data is ready for transmission. The keyboard will be locked until the host requests that the data is transmitted. Transmit Protocol Factory default: ANSI The setting of this option determines whether a partial page of data is transmitted in ANSI or VT131 format when the Send Partial Page option is selected. When ANSI is selected, Local Editing mode will function according to ANSI (American National Standards Institute) rules. When VT131 is selected, Local Editing mode will function in the same way as a VT131 terminal. Select this option when running software written for the VT131. 5-63 Setup Menus End of Line Characters Factory default: ^M (i. e. Note that the Column Sep (CS) option is only applicable to the IBM 5250 emulation, and the Hidden option is only applicable to the Wyse 60 emulation. Selecting the Use Italic with Intensity option will italicize any characters that have the intensity (bold) attribute. Selecting Use Bold Font will cause all characters to be displayed using a bold font. The setting of the Use Colours option in the Preferences box determines whether or not a specific colour is assigned to the text attribute. When the Use Colours option is selected, the colour of the screen element can be changed by tapping on the required 5-65 Setup Menus colour block in the palette of Foreground and/or Background colours. The two palettes enable you to specify a different colour for text (foreground) and text cell (background). Screen Element This list box enables you to select the screen element for definition. The Ansi Palette option allows you to specify which set of eight Foreground and Background colour indices are used when ANSI colour escape sequences are received. Either the upper or lower eight colours in the Foreground and Background palettes can be selected. The current eight colours are enclosed within a box. To change the current set of eight, just tap on any colour in the set required. [. . . ] (SC30-3533-02). Limitations: No text assist in Right to Left writing mode. The 3812-1 Non Host Print Transform (Non-SONYT) print protocol is not supported. The specification is also defined by the 5250 Device Capabilities report Bytes 0 thru 5 which are 0x7f, 0x11, 0x4e, 0x00, 0x03, 0x80 for Display Sessions. IBM 3151 Native Emulation Model 11 & 31 Specification: IBM 3151 Ascii Display Station Reference Manual (GA18-2634-01. 1989). ICL 7561 Specification: ICL DRS300 manual (R15722/001 Appendix 1 September 1986). Limitations: Some field validation checks are not supported. [. . . ]