User manual SONY VAIO VGN-SR210J/B

[. . . ] Microsoft®, Windows®, and Windows NT® are U. S. registered trademarks of Microsoft Corporation. registered trademark of Intel Corporation. Materials disposal This SONY product contains the following materials that might require special handling at end-of-life: Mercury in the fluorescent lamp in the liquid crystal display Lead in solder Alkaline manganese dioxide-zinc or lithium-iron disulfide AA batteries that are included with the camera Disposal of this material can be regulated because of environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (EIA) (www. eiae. org). Table of Contents Chapter 1: Getting started Camera parts . [. . . ] You can set up your software so that certain tasks occur automatically after the images are unloaded from the camera. To gain access to these options, click Options. When all the new images have been unloaded to your computer, the ArcSoft PhotoImpression software opens and you can view, edit, print, and create projects with your images. For more information, see the ArcSoft software Help. Tips for unloading images to a Macintosh computer When you unload images to your computer, the images are still stored in the camera until you delete them. If you take new pictures and then unload images again, the automatic unload software ignores the old images. That way, you do not end up with multiple copies of the same image on your computer. If you have no new images in your camera when you connect it to the computer, the automatic unload does not take place. In the Options window, you can disable the automatic unload feature. To turn the feature on again, open the Options window in the ArcSoft PI folder. Make sure you know where your images are stored on your computer's hard disk. By default, images are stored in the PhotoImpression folder, for example Macintosh HD:ArcSoft PI:Photos:2002. 07. 04. Tip As long as you have a CF memory card in the camera, you can gain access to only the images stored on the CF memory card. For more information, see "Using both internal memory and a CF memory card" on page 42. Storing images in memory 37 Determining the number of pictures you can take You can store as many as 113 images in the camera's internal memory. The number of pictures that you can take and store in the space remaining in memory depends on several factors. Unlike conventional film, each digital image takes up a different amount of space in memory. Images that are complex and contain many details take up more space, whereas simple images take up less space. Pictures taken full size occupy more space, whereas pictures taken with digital zoom occupy less space. However, the most important factor in image size is the image quality you have selected. The number of images remaining in memory is indicated in the status LCD on top of the camera. It is an approximate number that decreases as you take pictures. Note You can take each picture with a different setting. As you change the settings, the number of remaining images that is indicated on the status LCD changes. The number of images you can store in the camera depends primarily on image quality: Pictures taken with an image quality of BEST (three stars) require the most memory. [. . . ] TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE YOUR SOLE AND EXCLUSIVE REMEDIES. Troubleshooting 63 9 EXCEPT AS INDICATED ABOVE, IN NO EVENT WILL SONY OR ITS SUPPLIERS BE LIABLE FOR LOSS OF DATA OR FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUDING LOST PROFIT OR DATA), OR OTHER DAMAGE, WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT EXCLUDE, RESTRICT OR MODIFY AND ARE IN ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU. Hardware repair services If you think your camera, ADF, or XPA needs repair, first call the Customer Support Center, which can help determine if service is required and direct you to a service site. For more information, see "Contacting SONY Customer Support" on page 59. [. . . ]