User manual SONY VAIO VGN-SR210J/S

[. . . ] Nothing herein should be construed as constituting an additional warranty. SONY shall not be liable for technical or editorial errors or omissions contained herein. This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. Å Ä WARNING: Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. Desktop Management Guide Business Desktops First Edition (May 2004) Second Edition (June 2005) Document Part Number: 361202-002 Contents Desktop Management Guide Initial Configuration and Deployment . [. . . ] Copy any files you want to keep from your USB flash media device to a temporary directory on another drive (for example, the system's internal hard drive). At the A:\ prompt, enter FORMAT /S X: where X represents the drive letter noted before. Ä CAUTION: Be sure that you have entered the correct drive letter for the USB flash media device. FORMAT will display one or more warnings and ask you each time whether you want to proceed. FORMAT will format the USB flash media device, add the system files, and ask for a Volume Label. Press Enter for no label or enter one if desired. 18 www. hp. com Desktop Management Guide Desktop Management Guide 12. Copy any files you saved in step 9 back to your USB flash media device. Remove the diskette and reboot the computer. The computer will boot to the USB flash media device as drive C. default boot from Thechanged in theorder variesSetup computer to computer, and it can be Computer (F10) Utility. If you have used a DOS version from Windows 9x, you may see a brief Windows logo screen. If you do not want this screen, add a zero-length file named LOGO. SYS to the root directory of the USB flash media device. Return to "Copying to Multiple Computers" on page 15. Desktop Management Guide www. hp. com 19 Desktop Management Guide Unsupported USB Flash Media Device Ä CAUTION: Not all computers can be booted from a USB flash media device. Open the computer and re-install any PCI cards that were previously removed. Plug in the power cord, remove the diskette, and turn on the computer. As soon as the computer is turned on, press F10 when the monitor light turns green to enter Computer Setup. Press Enter to bypass the title screen, if necessary. Go to Advanced > PCI Devices and re-enable the PATA and SATA controllers that were disabled in step 6. Put the SATA controller on its original IRQ. The computer will boot to the USB flash media device as drive C. Desktop Management Guide www. hp. com 21 Desktop Management Guide default boot from and Thechanged in theorder variesSetup computer to computer, the it can be Computer (F10) Utility. Refer to Computer Setup Guide on the Documentation CD for instructions. If you have used a DOS version from Windows 9x, you may see a brief Windows logo screen. If you do not want this screen, add a zero-length file named LOGO. SYS to the root directory of the USB flash media device. Return to "Copying to Multiple Computers" on page 15. Dual-State Power Button With Advanced Configuration and Power Interface (ACPI) enabled, the power button can function either as an on/off switch or as a standby button. [. . . ] The setup password prevents unauthorized access to the Computer Setup utility. The Smart Cover Lock is available as an option on some systems. 36 www. hp. com Desktop Management Guide Desktop Management Guide Locking the Smart Cover Lock To activate and lock the Smart Cover Lock, complete the following steps: 1. If you are in Windows, click Start > Shut Down > Restart. As soon as the computer is turned on, press F10 when the monitor light turns green to enter Computer Setup. Press Enter to bypass the title screen, if necessary. [. . . ]