User manual SONY VAIO VGN-SR220J/B

[. . . ] This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www. openssl. org/) This product includes cryptographic software written by Eric Young (eay@cryptsoft. com) The material in this user's guide is for information purposes only and is subject to change without notice. Neoware UK Ltd accepts no responsibility for any errors contained herein. Trademarks TeemTalk is a registered trademark of Neoware UK Ltd. ADDS Viewpoint A2 is a trademark of Applied Digital Data Systems Inc. [. . . ] Bell On Factory default: Unselected This option enables or disables an audible tone which is heard when the emulation warns you about something. This needs to be selected when you want to use the Bell Column feature. Telserv Format Factory default: Selected The setting of this option determines how network data is treated. When selected, data will be treated in Tandem network server (Telserv) format. When unselected, data will be treated in serial format. Bell Column Factory default: 0 This option enables you to specify a particular column on the display which will cause an audible warning to sound when the cursor passes through it. The valid range of column numbers is 1 to 80. Setting this option to 0 will disable the feature. The Bell On option must be selected for this feature to work. Include Euro Factory default: Unselected When this option is selected, the International Currency symbol will be replaced by the Euro symbol. 6-51 Setup Menus IBM 3151 Settings This dialog box is displayed by selecting IBM 3151 in the Settings menu. Operating Mode Factory default: Echo The setting of this option determines how keyboard entered data is sent to the host and displayed on the screen. Return Key Factory default: Field This option specifies whether or not the cursor can enter a line within a protected field when the Return key is pressed. When set to Field, the result of pressing the Return key is determined by the setting of the Auto New Line option and the cursor will move to the next unprotected line. When set to New Line, the result of pressing the Return key is determined by the setting of the Auto New Line option. Send Operation Factory default: Page The setting of this option determines the effect of pressing the Send and Send Line keys. When set to Page, the contents of the current page will be sent to the host when Send is pressed, or the current line if Send Line is pressed. When set to Line, the contents of the current line will be sent to the host when Send is pressed, or the current page if Send Line is pressed. Model Factory default: 11 This option identifies the terminal model being emulated in response to a terminal identification request from the host. Model 11 supports only one viewport containing 24 or 25 rows and 80 columns. Model 31 supports up to three viewports (80 or 132 columns wide) and pass-through printing. Terminal ID Factory default: Unspecified This specifies what is reported back to the host in response to a terminal identification request. (Note that not all features of the specified terminal may be supported. ) The entry can be up to 20 characters long. [. . . ] (SC30-3533-02). Limitations: No Right to Left writing mode. The 3812-1 Non Host Print Transform (Non-SONYT) print protocol is not supported. The specification is also defined by the 5250 Device Capabilities report Bytes 0 thru 5 which are 0x7f, 0x11, 0x4e, 0x00, 0x03, 0x80 for Display Sessions. IBM 3151 Native Emulation Model 11 & 31 Specification: IBM 3151 Ascii Display Station Reference Manual (GA18-2634-01. 1989). ICL 7561 Specification: ICL DRS300 manual (R15722/001 Appendix 1 September 1986). Limitations: Some field validation checks are not supported. [. . . ]