User manual SONY VAIO VGN-SR290JTJ

[. . . ] IBM is a registered trademark of International Business Machines Corporation. Microsoft is a registered trademark of Microsoft Corporation. TeleVideo is a registered trademark, and TeleVideo 910, 910+ and 925 are trademarks of TeleVideo Systems, Inc. WYSE is a registered trademark, and WY-50, WY-50+ and WY-60 are trademarks of Wyse Technology Inc. [. . . ] Send Spaces Compressed Factory default: Unselected This option determines how spaces and empty character fields within a block of data are sent to the host. When unselected, a space character will be sent for each empty character position. When selected, a record separator code (RS) will be sent in place of empty character positions. The last field on a line will contain end of line characters as specified by the End of Line Characters option. 6-60 Setup Menus Send Partial Page Factory default: Unselected The setting of this option determines whether a partial page or data in the scrolling region is sent to the host when the Enter key is pressed and the Line Transmission On option is unselected. When selected, this option will enable a partial page to be sent to the host. The format of the partial page is determined by the setting of the Transmit Protocol option. When unselected, the contents of the scrolling region will be sent to the host when the Enter key is pressed. PF Key Effect Factory default: None This option determines how unshifted PF keys work in Local Editing mode. When set to None, the unshifted function of PF keys will be disabled. When set to Breakthrough, unshifted PF keys will function immediately when pressed if they have been assigned functions by application software. When set to As TX Prefix, the function of unshifted PF keys will be sent to the host before a block of data is transmitted. Refer to the ASCII character table in the Character Sets appendix for code and decimal references. 6-62 Setup Menus Attributes This dialog box is displayed by selecting Attributes in the Settings menu. It enables you to specify the colours used in the emulation workspace and how text with attributes is displayed. To change the way a screen element is displayed, select the relevant item from the Screen Element list box, for example, Bold (BD) for characters with the bold attribute. The settings of the other options in the dialog box will change to reflect the settings currently assigned to the screen element, and the Sample Text window will show how the screen element is actually displayed with these settings. Text with attributes can be displayed in various ways. For example, characters with the underline attribute can be displayed as standard (e. g. underlined only), as a particular colour only (e. g. green without the underline), or with both attribute and a specific colour (e. g. The Attribute options allow you to enable or disable any of the attributes normally associated with the currently selected screen element. Note that the Column Sep (CS) option is only applicable to the IBM 5250 emulation, and the Hidden option is only applicable to the Wyse 60 emulation. Selecting the Use Italic with Intensity option will italicize any characters that have the intensity (bold) attribute. [. . . ] (SC30-3533-02). Limitations: No text assist in Right to Left writing mode. The 3812-1 Non Host Print Transform (Non-SONYT) print protocol is not supported. The specification is also defined by the 5250 Device Capabilities report Bytes 0 thru 5 which are 0x7f, 0x11, 0x4e, 0x00, 0x03, 0x80 for Display Sessions. IBM 3151 Native Emulation Model 11 & 31 Specification: IBM 3151 Ascii Display Station Reference Manual (GA18-2634-01. 1989). ICL 7561 Specification: ICL DRS300 manual (R15722/001 Appendix 1 September 1986). Limitations: Some field validation checks are not supported. [. . . ]