User manual SONY VAIO VGN-SR290P

[. . . ] Nothing herein should be construed as constituting an additional warranty. SONY shall not be liable for technical or editorial errors or omissions contained herein. This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. Å Ä WARNING: Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. Hardware Reference Guide SONY Compaq t5000 Thin Client Third Edition (February 2005) First Edition (May 2003) Document Part Number: 334457-004 Contents 1 Product Features Standard Thin Client Features . [. . . ] The functions assigned to each mouse button depend on the software applications you are using. All SONY Compaq t5000 thin client models ship with a USB scroll mouse. 1-6 www. hp. com Hardware Reference Guide Product Features Serial Number Location Each thin client has a unique serial number which is located on the the thin client as shown in the following illustration. Keep this number available for use when contacting SONY customer service for assistance. Serial Number Location Hardware Reference Guide www. hp. com 1-7 Product Features 1-8 www. hp. com Hardware Reference Guide 2 Hardware Upgrades General Hardware Installation Sequence To ensure the proper installation of any thin client hardware option: 1. Turn the unit and any other attached devices off. Disconnect the power cord from the wall outlet. Disconnect any external devices or cables. Å Å Ä WARNING: To reduce the risk of personal injury from electrical shock and/or hot surfaces, be sure to disconnect the power cord from the wall outlet and allow the internal system components to cool before touching. WARNING: To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug telecommunications or telephone connectors into the network interface controller (NIC) receptacles. CAUTION: Static electricity can damage the electronic components of the thin client or optional equipment. Before beginning these procedures, ensure that you are discharged of static electricity by briefly touching a grounded metal object. See Appendix C, "Electrostatic Discharge" for more information. Hardware Reference Guide www. hp. com 2-1 Hardware Upgrades 3. See the section "Removing and Replacing the Side Access Panel" on page 2-3 for more information on how to access the system board. Remove, if necessary, any hardware that will be replaced. The following options are available on select models: Flash Memory on page 2-5 SODIMM Upgrade on page 2-6 PCI Expansion Module on page 2-7 MultiBay Hard Drive and Diskette Drive on page 2-10 More detailed instructions for installing thin client options are included in the option kits. If it is necessary to replace the internal battery, refer to the following section: Internal Battery on page 2-10. 6. Refer to the section "Removing and Replacing the Side Access Panel" on page 2-3 section for instructions on this procedure. To remove the PCI Expansion Module, reverse the previous steps. Hardware Reference Guide www. hp. com 2-9 Hardware Upgrades Internal Battery 1. Complete steps 1 through 4 of the "General Hardware Installation Sequence" on page 2-1. Pull back on the clip 1 that is holding the battery in place, and remove the battery 2. Insert the new battery and position the clip back into place. Removing and Replacing the Internal Battery 5. Complete steps 6 through 10 of the "General Hardware Installation Sequence" on page 2-1. MultiBay Hard Drive and Diskette Drive The MultiBay hard drive and diskette drive are available as options on select thin client models. These are external USB compatible drives. For additional installation information about these drives visit www. hp. com/products/thinclientsoftware or refer to the instructions that accompany these option. 2-10 www. hp. com Hardware Reference Guide A Specifications SONY Compaq t5000 thin client Dimensions Height Width Depth Approximate Weight Temperature Range (fanless design)* Operating (max. rate of change is 10° C per hour or 18° F per hour) Nonoperating (max. rate of change is 20° C per hour or 36° F per hour) *Specifications are at sea level with altitude derating of 1° C/300m (1. 8° F/1000ft) to a maximum of 3Km (10, 000ft), with no direct sustained sunlight. Upper limit may be limited by the type and number of options installed. 8. 9 in 4. 0 in 7. 7 in 2. 6 lb 50° to 95° F 22. 6 cm 10. 1 cm 19. 6 cm 1. 3 kg 10° to 35° C -22° to 140° F -30° to 60° C Relative Humidity (non-condensing) Operating (max. wet bulb temperature is 28° C or 84. 2° F) Nonoperating (max. [. . . ] This type of damage may reduce the life expectancy of the device. Preventing Electrostatic Damage To prevent electrostatic damage, observe the following precautions: Avoid hand contact by transporting and storing products in static-safe containers. Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations. Place parts on a grounded surface before removing them from their containers. Avoid touching pins, leads, or circuitry. [. . . ]