User manual SONY VAIO VGN-SR410J

[. . . ] Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Don't throw away the battery with general house waste, dispose of it correctly as chemical waste. This system conforms to VIDEO CDs without PBC* functions (Ver. You can enjoy two kinds of playback according to the disc type. [. . . ] The frequency indication changes and scanning stops when the system tunes in a station (Automatic Tuning). When "CD" is selected as the current function and TUNER/BAND is pressed to select "TUNER", it may take some time to switch the function. With the side you want to play/record facing forward. Searching for the beginning of the current or the next track (AMS)* To go forward Press > during playback when N lights in the display. Select j (or RELAY) to record on both sides. Press v or V repeatedly to set the hour, then press B. To record a disc with MP3 files by specifying folder/file order After step 1, program the MP3 files following the procedures in "To program the MP3 files" on page 12, then proceed to step 3 above. To check the required tape length for recording a disc, press EDIT until "EDIT" flashes after you have loaded disc and pressed CD. The required tape length for the currently selected CD appears after the total playing time for side A and side B appears respectively (Tape Select Edit). When the recording starts, the volume level is set to the minimum. You cannot use Tape Select Edit for discs containing over 20 tracks or MP3 files. When the CD contains more than 20 tracks, CD-TEXT is not displayed from track 21 on. Depending on the disc, some information may not appear. Each time you press the button the display changes cyclically as follows: Elapsed playing time of the current track t Remaining time of the current track*1 t Remaining time of the disc*2 t Track title of CD-TEXT disc*3 or file name of MP3 file t Folder name of MP3 file (for a few seconds)*4 t Clock display (for eight seconds) t Effect status *1 "­ ­. ­ ­" appears when playing the program containing more than 20 tracks or 100 minutes, or MP3 files. ­ ­" appears in ALL DISCS, SHUFFLE or PROGRAM mode or when playing back MP3 files. *3 When the CD contains more than 20 tracks, CD-TEXT is not displayed from track 21 on. Each time you press the button, the display changes cyclically as follows: DIMMER 1 t DIMMER 2 t DIMMER 3 t DIMMER OFF Elapsed playing time of the current track* t Clock display (for eight seconds) t Effect status * The elapsed playing time may not be displayed in some cases such as during still image playback. You can check the current operating status and disc information of VIDEO CDs or audio CDs during playback or in stop mode. Depending on conditions, some items are displayed and others are not. During playback of a Current folder name and file disc with MP3 files* name In other conditions No display Each time you press this button, the on-screen display changes cyclically as follows: ON SCREEN 1 t ON SCREEN 2 t ON SCREEN OFF* * When the MP3 file information includes an ID3 tag, the on-screen display information may differ from the ID3 information shown on the system display in order to display the file name. Check to make sure that ON SCREEN OFF is selected when recording a video signal played back by this system onto a video tape, etc. [. . . ] To avoid burning yourself, do not touch the cabinet. Otherwise the tape may get entangled in the parts of the tape deck and become damaged. VAIO VGN-SR410J The following measured at AC 120, 127, 220, 240 V, 50/60 Hz DIN power output (rated) 115 + 115 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 140 + 140 watts (6 ohms at 1 kHz, 10% THD) MHC-RV5 The following measured at AC 120, 127, 220, 240 V, 50/60 Hz DIN power output (rated) 100 + 100 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 120 + 120 watts (6 ohms at 1 kHz, 10% THD) Inputs MD/VIDEO (AUDIO) IN (phono jacks): voltage 450/250 mV, impedance 47 kilohms GAME INPUT (VIDEO) (phono jack): 1Vp-p, 75 ohms GAME INPUT (AUDIO) (phono jack): voltage 250 mV, impedance 47 kilohms MIC (phone jack): sensitivity 1 mV, impedance 10 kilohms Outputs PHONES (stereo mini jack): accepts headphones of 8 ohms or more SPEAKER: accepts impedance of 6 to 16 ohms SURROUND SPEAKER (VAIO VGN-SR410J only): accepts impedance of 24 ohms MD/VIDEO (AUDIO) OUT (phono jacks): impedance 1 kilohms VIDEO OUT (phono jack): 1Vp-p, impedance 75 ohms When using a tape longer than 90 minutes the tape is very elastic. Do not change the tape operations such as play, stop, and fast-winding frequently. [. . . ]