User manual SONY VAIO VGN-SR430J/H

[. . . ] Before you install your graphics card, refer to the your workstation's Owner's Guide for important system configuration information. Graphics cards are susceptible to electrostatic shock. [. . . ] When referring to your system model/type and for obtaining the proper driver version, use the AxxxxX nomenclature on the regulatory label (found next to the serial number regulatory label on the back of the machine). Following the procedures described in your workstation's Owner's Guide, install the graphics board into the appropriate AGP Pro slot (see the system board slot diagram below). Slide the board into the slot, making sure the board is fully seated in the connector. 2. Install graphics card in AGP Pro Slot Example system board 3. Once you have installed the card, you must install the proper graphics driver which is available on the enclosed A6076- 90001 nVIDIA CD. To obtain future driver upgrades and the Card Installation Instructions as supplied by http://www. hp. com/workstations/support nVIDIA , go to: a. If you are installing on a system that previously had a different graphics card, you must uninstall that device's driver. Use the Windows® Control Panel utilities (Add/Remove Programs) to remove the old driver. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Notice for Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la Class B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Notice for Japan (Class B) Declaration of Conformity according to ISO/IEC Guide 22 and EN 45014 Manufacturer: Hewlett-Packard Company 3404 East Harmony Rd. Fort Collins, CO 80528 USA FireGL2 Graphics Card A6076A All Declares that the: Product Name: Model Number: Product Options: conforms to the following specifications: Safety EN 60950 EMC CISPR 22: 1993 & EN 55022: 1994 Class B EN 50024:1998 Also compliant with. EN 61000-3-2: 1995 EN 61000-3-3: 1995 U. S. FCC Part 15, Class B Japan VCCI Class B Australia/New Zealand AS/NZS 3548:1995A and is certified by: Bay Area Compliance Laboratory Corporation Supplementary information: The product herewith complies with the requirements of the following Directives and carries the CE marking accordingly: - the EMC directive 89/336/EEC and 92/31/EEC and 93/68/EEC - the Low Voltage Directive 73/23/EEC and 93/68/EEC This product was tested in a typical Hewlett-Packard workstation configuration. [. . . ] FCC Part 15, Class B Japan VCCI Class B Australia/New Zealand AS/NZS 3548:1995A and is certified by: Bay Area Compliance Laboratory Corporation Supplementary information: The product herewith complies with the requirements of the following Directives and carries the CE marking accordingly: - the EMC directive 89/336/EEC and 92/31/EEC and 93/68/EEC - the Low Voltage Directive 73/23/EEC and 93/68/EEC This product was tested in a typical Hewlett-Packard workstation configuration. Original signed by Ruth Lutes, Site Quality Manager, Fort Collins, CO, USA For Compliance Information ONLY, contact: European Contact: Your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Dept. [. . . ]