User manual SONY VAIO VGN-SR490JBB

[. . . ] The latest BIOS must be installed on your workstation before installing the new graphics card. The latest BIOS can be downloaded from http://www. hp. com/go/workstationsupport. If the latest BIOS is not installed, you may experience no video, PCI Option ROM errors and system stops during selftest (POST). [. . . ] In addition, if you have purchased and/or installed Windows® 2000, a chipset driver must be installed to enable AGP. If an AGP graphics card is not run in AGP mode, you may experience extremely slow graphics performance, system lockups and Windows® stop errors. The chipset driver can be downloaded from http://www. hp. com/go/workstationsupport. Before opening your workstation to install the graphics card, disconnect all cables from the system. When referring to your system model/type and for obtaining the proper driver version, please use the AxxxxX nomenclature found on the Serial Number plate on the back of the machine. Following the procedures described in your workstation's Technical Reference, install the graphics board into the appropriate AGP Pro slot (see the next diagram). Slide the board into the slot and ensure it is fully seated in the connector. Please refer to the warranty statement provided with your SONY Visualize Personal Workstation for warranty limitations, customer responsibilities, and other terms and conditions. FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND: The warranty terms contained in this statement, except to the extent lawfully permitted, do not exclude, restrict or modify and are in addition to the mandatory statutory rights applicable to the sale of this product to you. Regulatory Information FCC (for USA only) Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and the Canadian Department of Communications. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Notice for Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la Class B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Notice for Japan (Class B) Declaration of Conformity according to ISO/IEC Guide 22 and EN 45014 Manufacturer: Hewlett-Packard Company 3404 East Harmony Rd. Fort Collins, CO 80528 USA ATI Fire GL 8800 Graphics Accelerator Card (as supplied by ATI Corp. ) A8050A All Declares that the: Product Name: Model Number: Product Options: conforms to the following specifications: EN 60950 Safety EMC CISPR 22: 1993 & EN 55022: 1994 Class B EN 50024:1998 Also compliant with. [. . . ] Fort Collins, CO 80528 USA ATI Fire GL 8800 Graphics Accelerator Card (as supplied by ATI Corp. ) A8050A All Declares that the: Product Name: Model Number: Product Options: conforms to the following specifications: EN 60950 Safety EMC CISPR 22: 1993 & EN 55022: 1994 Class B EN 50024:1998 Also compliant with. EN 61000-3-2: 1995 EN 61000-3-3: 1995 U. S. FCC Part 15, Class B Japan VCCI Class B Australia/New Zealand AS/NZS 3548:1995A and is certified by: Bay Area Compliance Laboratory Corporation Supplementary information: The product herewith complies with the requirements of the following Directives and carries the CE marking accordingly: - the EMC directive 89/336/EEC and 92/31/EEC and 93/68/EEC - the Low Voltage Directive 73/23/EEC and 93/68/EEC This product was tested in a typical Hewlett-Packard workstation configuration. [. . . ]