User manual SONY VAIO VGN-SR499DEB

[. . . ] Warranty A copy of the specific warranty terms applicable to your Hewlett-Packard product and replacement parts can be obtained from your local Sales and Service Office. Restricted Rights Legend Use, duplication, or disclosure by the U. S. Government is subject to restrictions as set forth in sub-paragraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause in DFARS 252. 227-7013. [. . . ] Hewlett-Packard Company 3000 Hanover Street Palo Alto, CA 94304 U. S. A. Government Departments and Agencies are as set forth in FAR 52. 227-19(c)(1, 2). All rights reserved. 2 Troubleshooting SCR+DMI for SONY-UX 1 Troubleshooting SCR+DMI for SONY-UX This document describes steps you can take if SCR+DMI for SONY-UX is not running properly. Ensure that DCE/RPC is running correctly on all the systems involved · Check for the necessary daemons, and restart them if necessary. Run the command, ps ­ef The output should include the following daemons: -- For DCE on both the server and the client node(s): root46910 Sep 27?1:51/opt/dce/sbin/rpcd -- For DMI on both the server and the client node: root2717310Oct 4?4:21/usr/dmi/bin/dmisp root272410Oct 4?0:35/usr/dmi/bin/hpuxci root2719510Oct 4?2:18/usr/dmi/bin/swci -- For SCR on the server: root73731016:23:52?0:00/opt/scr/lbin/scrdaemon · Check that you have the required software and patches. Refer to the README for the release of SONY-UX you are working with. The patches assume a base level of the SONY-UX Applications Release distributed 7 June, 1999. The contents of the dialog should be replaced with three icons labeled: · · · DMI 2. 0 Service Provider SONY-UX Standard Groups Definition SONY-UX Installed Software Definition 3. Double-click on the SONY-UX Standard Groups Definition icon. Multiple icons should be displayed with labels including: · · · General Information Operating System Host System 4. Run /opt/scr/bin/scrstatus The output will list a time, a node name, the status on that node and details. Possible results include the following: Table 1-1 Status Values Status Completed Executing Scheduled Warning or Error Detail Tmout What this means SCR worked correctly on this node at this time SCR is currently collecting data on this node. SCR is set to collect data from this node at the time listed under the "Time" column. Possible problems include: - DCE/RPC problem - Network problem You can increase the timeout value with the /opt/scr/bin/scrconfig command. [. . . ] SCR is set to collect data from this node at the time listed under the "Time" column. Possible problems include: - DCE/RPC problem - Network problem You can increase the timeout value with the /opt/scr/bin/scrconfig command. SONY recommends a value of 10 minutes, and even more time may be required if your network slows down. [. . . ]