User manual SONY VAIO VGN-Z610Y

[. . . ] Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corporation (USA) in the USA and in other countries. QuickTime and the QuickTime logo are trademarks used under license (licence). , , and MICROMV logo are trademarks of Sony Corporation. Other system names and product names appearing in this document are generally registered trademarks or trademarks of their manufacturers, although TM and ® marks are not shown in this document. About the copyright: Video or audio files recorded using this software should not be utilized (utilised) for any purpose other than private pleasure unless prior permission from its rightful owner under the Copyright Act is obtained. About the screenshots used in this manual: The screenshots used in this manual may be somewhat different than those you actually see on your own computer; this is due to the different specifications of various computers. Copying all or part of the contents of this software and manual, or renting the software without authorization are prohibited by copyright laws. The Company cannot accept liability for damage or loss resulting from the use of this software, or for any claim from a third party. [. . . ] To capture other images back to back, repeat steps 3 through 6. Note You cannot capture images while they are displayed on the Full screen monitor. 24 To capture all images that have an index and arrange them on the Product tray (Dubbing) You can automatically capture all images that have an index contained on the videotape. The captured files are imported into the Clip tray, and then they are arranged on the Product tray as scenes. (Dubbing) Notes Basic Operation · Capturing stops if the MICROMV device is disconnected from your computer, its power turned off, or the videotape ejected from the MICROMV device. · The "Dubbing" function is disabled unless the MICROMV device is in VCR mode. Clip tray Menu bar Capture tab "Dubbing" button "Export" button 1 Insert a videotape into the MICROMV device. Note When you use MovieShaker for the DV device, select the "Device" menu from the Menu bar, and then click "MICROMV Device" to select it. Continued 25 2 Click the Capture tab. The Capture tab is highlighted, and the Monitor panel switches to the Capture tray. The Tool panel displays the Index tray where the information of the images on the MICROMV device (e. g. , Cassette Labels for videotapes, date and time recorded, and recorded time) appears. 3 4 Click the "Dubbing" button. The "Dubbing - Confirm Batch Capture" dialog (dialogue) box appears. Click "OK. " The "Dubbing - Batch Capturing" dialog (dialogue) box appears. You can cancel capturing by clicking the "Stop" button while capturing. When capturing is finished, the dialog (dialogue) box indicating importing progress appears. When importing all images is finished, the captured files are placed on the Clip tray and they are automatically arranged on the Product tray as scenes. 5 Click "Export" if you want to export the scenes arranged on the Product tray. The final movie product is exported. For further information about exporting, see "Exporting a final movie product. " (page 41) Notes · Images that are captured by clicking the "Dubbing" button are only portion from the recording start point (index) to the recording stop point. If the videotape has been rerecorded over any portion of its length, and there is a break from its recording stop point to the next recording start point, that portion of images will be skipped. · You can also simultaneously place more than one clip on the Scene palettes. The scenes appear in the order in which the clips are placed on the Clip tray. To select more than one clip at the same time, click on the desired clips while pressing the Ctrl key. To select a sequential block of clips, click on the first clip, and then click on the last clip while pressing the Shift key. All clips between (and including) the first and last clips are placed on the Scene palettes in the order they appeared on the Clip tray. Note When you use a large size clip or more than one clip at the same time, it may be timeconsuming. To rearrange the order of scenes You can rearrange the order of scenes on the Storyboard by dragging and dropping them. To remove a scene To remove a scene from the Storyboard, drag and drop it in the Trash in the MovieShaker window. You can also remove a scene by clicking it and pressing the Delete key. You can also remove more than one scene at the same time. To select a sequential block of scenes, click on the first scene, and then click on the last scene while pressing the Shift key. z Hint By inserting your own narrations, such as explanations or comments, etc. , you can make your movie even more effective. Use the Timeline to insert a narration into a movie. For further information, see the on-line help. 30 To place a transition effect between scenes You can add an effect, such as a cross-fade or wipe effect, on a Transition palette of the Storyboard to provide an interesting transition from one scene to another. 1 Click the "Transition" button. The Transition tray appears. Basic Operation "Transition" button Transition preview monitor Transition palette Trash Transition Transition time slider 2 Click on the desired transition pattern. The Transition preview monitor shows the contents of the transition. [. . . ] THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM COUNTRY TO COUNTRY. EXCLUSION OF WARRANTY ON THE SOFTWARE You expressly acknowledge and agree that use of the Software is at your sole risk. THE SOFTWARE IS PROVIDED "AS IS" AND WITHOUT WARRANTY OF ANY KIND, AND SONY EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGMENT AND FITNESS FOR A PARTICULAR PURPOSE. SONY DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR CORRECT. [. . . ]