User manual SONY VAIO VGN-Z690Y

[. . . ] This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of SONY. Box 4010 Cupertino, CA 95015-4010 USA Copyright © 2005­2007 Hewlett-Packard Development Company, L. P. May be licensed in the United States by one or both of U. S. [. . . ] A NIC uses a network cable to connect to a local area network (LAN). Do not connect a telephone cable to the NIC. Do not plug a network cable into a telephone service line; doing so may damage the NIC. For more information about connecting to the Internet, press the Help ?button on the keyboard to open the Help and Support Center. Verify that the Web browser is installed and set up to work with your ISP. Try to connect again later, or contact your ISP for assistance. I cannot automatically start Internet programs. Log in to your ISP, and start the desired program. Verify that the correct modem speed and COM port are selected: 1 Click the Windows Start Button, and then click Control Panel. 4 Select the Modems tab, and then click the Properties button. Possible solution Turn off the computer by using the mouse, reconnect the keyboard to the back of your computer, and then turn on your computer. Refer to the Limited Warranty and Support Guide to contact Support. Use the Print menu item in the program (usually located on the File menu). Ensure the keyboard is within the range of the receiver. Replace the batteries in the wireless keyboard. Refer to the documentation that came with the keyboard. Wireless mouse does not work or is not detected. Ensure the mouse is within the range of the receiver. Replace the batteries in the wireless mouse. Refer to the documentation that came with the mouse. Cursor does not respond to mouse movement. [. . . ] 2 Remove the SONY Personal Media Drive if your computer includes one. Disconnect all peripheral devices from the computer except the monitor, the keyboard, and the mouse. 3 Press the On button to turn on the computer. 4 During the startup, do the following to enter the Recovery Manager program: When the blue screen with the SONY Invent logo appears, press the F11 key on the keyboard. [. . . ]