User manual SONY VAIO VGN-FW590GLB

[. . . ] SONY may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. SONY may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. © Copyright International Business Machines Corporation 2004. US Government Users Restricted Rights ­ Use, duplication or disclosure restricted by GSA ADP Schedule Contract with SONY Corp. Important safety information This information can help you safely use your SONY® personal computer. [. . . ] In the startup menu in SONY BIOS Setup Utility, make sure that the device is included in the "Boot priority order" list. If it is included in the "Excluded from boot order" list, it is disabled. Select the entry for it in the list and press the x key. This moves the entry to the "Boot priority order" list. Problem: The computer does not respond. Chapter 2. Solving computer problems 27 Solving computer problems Solution: IRQs for the PCI are all set as 11. The computer does not respond because it cannot share the IRQ with other devices. Refer to the ThinkPad Configuration Program. Problem: You may receive an "Unsafe Removal of Device" message that mentions the USB 1. x device when you resume from suspend or hibernation in Windows 2000. Solution: You can safely close this message window. It is displayed because of a USB 2. 0 driver problem in Windows 2000. The System Restart Required window is displayed. The computer restarts, and SONY BIOS Setup Utility screen appears. If you have set a supervisor password, the SONY BIOS Setup Utility menu appears after you enter the password. You can start the utility by pressing Enter instead of entering the supervisor password; however, you cannot change the parameters that are protected by the supervisor password. For more information, refer to the on-board help. Using the cursor keys, move to an item you want to change. When the item you want is highlighted, press Enter. To change the value of an item, use the F5 or F6 key. If the item has a submenu, you can display it by pressing Enter. Press F3 or Esc to exit from the submenu. If you are in a nested submenu, press Esc repeatedly until you reach the SONY BIOS Setup Utility menu. [. . . ] Program Service Only 30-day "up and running" support is available. See inside this document for information regarding Lotus Customer Support options. Statement of Service These programs are provided "AS IS". PROGRAMS DESIGNATED AS "NO" ARE PROVIDED WITHOUT A PROGRAM WARRANTY. [. . . ]