User manual SONY VAIO VGN-SR590FGB

[. . . ] 6 Where these guidelines are applicable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Steps to add SATA drivers to the CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Using OSCDIMG (or CDIMAGE) and CDBURN (command line utilities from Microsoft) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Adding SATA Drivers to WinPE 2005 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Although this whitepaper is intended to cover SONY Compaq Notebook PCs, this section should also be applicable to SONY Compaq desktop and workstation PCs. Steps to add SATA support to the original image 1) Download the Intel SATA AHCI Controller Driver, SoftPaq SP32478. exe, from www. hp. com. 2) Extract all the files from the SoftPaq. A USB floppy is necessary for this step. Run sp32478; this will create a floppy disk. The files will be located on this floppy. 3) These files should be located on the floppy disk. txtsetup. oem 3 4) On the system you intend to Sysprep, add the first 5 files (a through e, from above) to the PnP drivers store (example: c:\drivers\sata). 5) Add the following section to your c:\sysprep\sysprep. inf file: [SysprepMassStorage] PCI\VEN_8086&DEV_27C1&CC_0106 = %systemdrive%\drivers\sata\iaahci. inf 82801GR/GH SATA AHCI Controller (Desktop ICH7R/DH) PCI\VEN_8086&DEV_27C5&CC_0106 = %systemdrive%\drivers\sata\iaahci. inf 82801GBM SATA AHCI Controller (Mobile ICH7M) PCI\VEN_8086&DEV_2652&CC_0106 = %systemdrive%\drivers\sata\iaahci. inf 82801FR SATA AHCI Controller (Desktop ICH6R) PCI\VEN_8086&DEV_2653&CC_0106 = %systemdrive%\drivers\sata\iaahci. inf 82801FBM SATA AHCI Controller (Mobile ICH6M) PCI\VEN_8086&DEV_27C3&CC_0104 = %systemdrive%\drivers\sata\iastor. inf 82801GR/GH SATA RAID Controller (Desktop ICH7R/DH) PCI\VEN_8086&DEV_24DF&CC_0104 = %systemdrive%\drivers\sata\iastor. inf 82801ER SATA RAID Controller (Desktop ICH5R) PCI\VEN_8086&DEV_25B0&CC_0104 = %systemdrive%\drivers\sata\iastor. inf 6300ESB SATA RAID Controller PCI\VEN_8086&DEV_2652&CC_0104 = %systemdrive%\drivers\sata\iastor. inf 82801FR SATA RAID Controller (Desktop ICH6R) ; ; ; ; ; ; ; ; Intel(R) Intel(R) Intel(R) Intel(R) Intel(R) Intel(R) Intel(R) Intel(R) Please note that each line to be added starts with PCI\. These lines are continued over to a second row in this paper due to space limitations. 6) Add or edit the following section of sysprep. inf to add the SATA drivers to the PnP drivers path. [Unattended] OemSkipEula=Yes OemPnPDriversPath=drivers\sata;<your driver list will come here> ConfirmHardware=No OverwriteOemFilesOnupgrade=No DriverSigningPolicy = Ignore oempreinstall=yes updateInstalledDrivers=Yes 7) At this point, the Windows installation is ready for deployment. Select "User Interaction desired" f. Enter desired information under each of the following Settings sections h. Save the file as c:\xpcd\i386\winnt. sif 15) Open the c:\xpcd\i386\winnt. sif in notepad 16) Under the section [Unattended], add the following lines: OemPreinstall=yes OemPnPDriversPath=drivers\sata DriverSigningPolicy = Ignore 17) Save winnt. sif and close notepad 18) Burn the custom XPCD from the c:\xpcd folder. Note that the volume label of the CD must be the same as from the original XP CD = = = = = = = = "iaStor" "iaStor" "iaStor" "iaStor" "iaStor" "iaStor" "iaStor" "iaStor" 7 b. The custom XPCD must be bootable (with the Microsoft bootblock). There are various 3rd party utilities which can accomplish this. Utilities from Microsoft are available, as detailed in the following section. Using OSCDIMG (or CDIMAGE) and CDBURN (command line utilities from Microsoft) Note: You will need the OSCDIMG and CDBURN utilities. OSCDIMG is found in the WinPE toolkit folder or the OPK. 12) Create the WinPE . ISO file or DOK from c:\winpe. This is done in the usual manner. = = = = = = = = "iaStor" "iaStor" "iaStor" "iaStor" "iaStor" "iaStor" "iaStor" "iaStor" Modifying a Windows XP installation to support SATA Native Mode Where these guidelines are applicable IMPORTANT: Follow the installation instructions in the order provided. Failure to complete these steps in the proper order can result in an unsuccessful or unstable installation. This section provides guidelines for customers who have built an image with SATA AHCI Native Mode disabled in F10 Setup, and need to modify the image to support SATA AHCI Native Mode enabled (the default mode). [. . . ] A warning that Windows cannot verify that the device is compatible with your hardware will appear. When asked if you want to continue installing the driver, select Yes. 9) Shut down Windows and restart the computer. Enter F10 setup when prompted during the boot. [. . . ]