User manual SONY VAIO VGN-Z898H

[. . . ] Press F2 when prompted to enter the BIOS Setup utility. Using the down arrow key, highlight Secondary Master. [. . . ] In the screen that opens, the Type: [AUTO] option is highlighted. te da Up te da Up 5. Press the spacebar until the Type: option is set to [NONE]. Right-click the My Computer icon, then select Properties. The System Properties dialog box opens. 8. Click the second Generic IDE Disk in the list, then click Properties. The Generic IDE Drive Properties dialog box opens. 11. In the Options area, click to remove the check mark from the Int 13 unit check box. If this option is unavailable, check the Current drive letter assignment: text box and make sure that C: does not appear. After aligning the connectors, push down to secure the attachment. 6 Update 5. Slide the hard disk drive into the mounting bracket. 6. Secure the hard disk drive to the mounting bracket with the screws you removed in Step 1. The hard disk drive module is ready to be installed in your notebook's modular option bay. Important Information About Your Second Hard Disk Drive Module 7 Some uses for your hard disk drive module x Data protection. To protect the data on your primary hard disk drive, copy your data files onto the second hard disk drive icon using My Computer or Windows Explorer, then keep the second hard disk drive in a safe place. You can perform this easy backup procedure as often as you need to. Moving data from one notebook to another more easily. Instead of filling up boxes of diskettes to move data files from one notebook to another, copy the files to the hard disk drive module, insert the drive module in the notebook you need the files copied to, then copy the files. [. . . ] Moving data from one notebook to another more easily. Instead of filling up boxes of diskettes to move data files from one notebook to another, copy the files to the hard disk drive module, insert the drive module in the notebook you need the files copied to, then copy the files. [. . . ]