User manual SONY VGP-BPS3A

[. . . ] the Sony VGP-BPS3A docking station is designed for Sony personal computers. However, it may not be used with some models. Docking station connector Custom connector (1) USB Type-A connector (3) *1 External display output MONITOR ( a ) : Analog RGB, VGA type, D-sub 15 pin (1) DVI-D ( ) : DVI connector (1) *2 LAN connector *1 LAN (10BASE-T/100BASE-TX/1000BASE-T) (1) Power requirement AC adaptor *3 Operating temperature 41°F to 95°F (5°C to 35°C) (temperature gradient less than 18°F (10°C)/hour) Operating humidity 20% to 80% (not condensed), provided that humidity is less than 65% at 95°F (35°C) (hygrometer reading of less than 84°F (29°C)) Storage temperature ­4°F to 140°F (­20°C to 60°C) (temperature gradient less than 18°F (10°C)/hour) Storage humidity 10% to 90% (not condensed), provided that humidity is less than 20% at 140°F (60°C) (hygrometer reading of less than 95°F (35°C)) Dimensions Approx. [. . . ] Docking station connector Custom connector (1) USB Type-A connector (3) *1 External display output MONITOR ( a ) : Analog RGB, VGA type, D-sub 15 pin (1) DVI-D ( ) : DVI connector (1) *2 LAN connector *1 LAN (10BASE-T/100BASE-TX/1000BASE-T) (1) Power requirement AC adaptor *3 Operating temperature 41°F to 95°F (5°C to 35°C) (temperature gradient less than 18°F (10°C)/hour) Operating humidity 20% to 80% (not condensed), provided that humidity is less than 65% at 95°F (35°C) (hygrometer reading of less than 84°F (29°C)) Storage temperature ­4°F to 140°F (­20°C to 60°C) (temperature gradient less than 18°F (10°C)/hour) Storage humidity 10% to 90% (not condensed), provided that humidity is less than 20% at 140°F (60°C) (hygrometer reading of less than 95°F (35°C)) Dimensions Approx. 6 kg) Supplied accessories Warranty (1) Operating instructions (1) Safety Regulations (1) *1 The specifications are the same as those of the computer you are using. for details , refer to the manuals provided with your computer. *2 This connector cannot be used if your computer processes graphics with an Intel® Graphics Media Accelerator. *3 Use your product only with the AC adaptor supplied with your computer. Design and specifications are subject to change without notice. Use your product only with the AC adaptor supplied with your computer. Moving your computer with the unit installed could cause the unit to fall off, resulting in personal injury, or damage to the unit or your computer. If there are any dust or dirt particles on the docking station connector, your computer may not be able to detect the docking station when it is connected (even if the particles are invisible to the eye). If the connection seems to be poor, remove the AC power adaptor and battery, and wipe off the connector and the area around it on both the computer and the unit. Commercial air dusters are also effective for blowing away residual dust and dirt. Be careful not to damage the connectors while cleaning them. When using this unit attached to your computer, make sure that the IN USE indicator lights up. If the IN USE indicator does not light up, detach this unit from your computer once, and then attach it again so that the IN USE indicator lights up. [. . . ] When using this unit attached to your computer, make sure that the IN USE indicator lights up. If the IN USE indicator does not light up, detach this unit from your computer once, and then attach it again so that the IN USE indicator lights up. Clean the unit with a soft dry cloth or a soft cloth lightly moistened with a mild detergent solution. [. . . ]