User manual SONY VGP-MM512M

[. . . ] In this manual, Microsoft® Windows® XP Home Edition and Microsoft® Windows® XP Professional are referred to as Windows XP. In this manual, Microsoft® Windows VistaTM Home Basic, Microsoft® Windows VistaTM Home Premium, Microsoft® Windows VistaTM Business and Microsoft® Windows VistaTM Ultimate are referred to as Windows Vista. *1 Communication range will vary according to whether walls or other obstacles are located between devices, the material used in walls, the presence of radio frequency interference and other environmental conditions, and the type of software being used. Design and specifications are subject to change without notice. [. . . ] When you move the mouse, the pointer displayed on your screen moves in the same direction. Due to the characteristics of the laser sensor, the mouse may not work properly on transparent surfaces or on a mouse pad that has a clear surface. Avoid using on such materials, or use a commercially-available mouse pad that is compatible with a laser sensor mouse. The fluoropolymer used for the soles of the mouse (PTFE, or polytetrafluoroethylene) is designed for low frictional resistance, but the mouse may slide differently depending on what material your desk or mousepad is made of. The mouse may have difficulty communicating in an environment with 2. 4 GHz wireless LAN or other Bluetooth communication. C It is best to use the mouse in a location with low interference from wireless devices. Set the power switch located on the bottom of the mouse to OFF. If necessary, you can adjust the mouse pointer speed under "Mouse Properties". To display "Mouse Properties", with the Windows Vista operating system, doubleclick "Mouse" in the "Control Panel" (with the Windows XP operating system, select "Printers and Other Hardware" in the "Control Panel", then select "Mouse"). FCC Radiation Exposure Statement: These products comply with FCC radiation exposure limits set forth for uncontrolled equipment and meet the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. Do not mix old and new batteries, or batteries of a different type. If the mouse has not been used for a long time, remove the batteries. If a battery fluid leak occurs, carefully wipe the battery compartment, and insert new batteries. To prevent accidental operation, be careful not to press any buttons when replacing the batteries. Use to open saved documents, pictures and other files and to run programs. Most mouse functions are performed using this button. Use this button to display shortcut menus that allow you to copy saved documents, pictures and other files, view file details, and access various commands and settings. The use of optical instruments with this product will increase eye hazard. The pointer does not move when I move the mouse. C Processing performed by Windows or other software may temporarily disable the mouse. Wait a few moments for the processing to finish before using the mouse. [. . . ] replace the batteries if the low battery lamp is flashing red. When not using the mouse, set the power switch to OFF. This will make the batteries last longer. 4 GHz band used by Bluetooth and wireless LAN devices is also used by various other devices. [. . . ]