User manual SONY VGP-PRBZ1

[. . . ] When the unit is plugged into an AC power socket, you can connect another device to a network via the unit, even if the unit is not connected to a personal computer. 2 A Operating temperature 5 °C to 35 °C (temperature gradient less than 10 °C/hour) Operating humidity 20% to 80% (not condensed), provided that humidity is less than 65% at 35 °C (hygrometer reading of less than 29 °C) Storage temperature -20 °C to +60 °C (temperature gradient less than 10 °C/hour) Storage humidity 10% to 90% (not condensed), provided that humidity is less than 20% at 60 °C (hygrometer reading of less than 35 °C) Dimensions Approx. 1, 140 g Supplied accessories AC adapter Power cord *4 Warranty Operating instructions Safety Regulations *1 The specifications are the same as those of the computer you are using. [. . . ] *3 Use the AC adapter (VGP-AC19V16) and power cord supplied with this unit only. The AC adapter supplied with your computer is not compatible. *4 The numbers supplied vary depending on the country or region. Use a suitable power cord that matches your power outlet. Design and specifications are subject to change without notice. Use the AC adapter and power cord supplied with this unit only. Do not place the unit in locations that are: ­ Extremely hot or cold ­ Dusty or dirty ­ Very humid ­ Vibrating ­ Subject to strong magnetic fields ­ Sandy ­ Subject to direct sunlight · Make sure that nothing metallic comes into contact with the metal parts of the unit. Be careful not to damage the connector while cleaning them. When connecting the unit to a personal computer, remove the AC power adapter, LAN cable, and display cable from the computer. Simultaneous use of the DVI-D port and the MONITOR port is not possible. Additionally, simultaneous use of the HDMI output port on your computer and the DVI-D port or the MONITOR port on the port replicator is not possible. Using an incorrect cable, such as a phone cable, may result in an electric current overload that can cause a malfunction, excessive heat, or fire in the network (LAN) port. It is extremely important that you replace the port replicator connector cover after disconnecting your computer from the port replicator. If the connector is left uncovered, dust may get inside and damage the computer. [. . . ] It is extremely important that you replace the port replicator connector cover after disconnecting your computer from the port replicator. If the connector is left uncovered, dust may get inside and damage the computer. When you use the DVI-D port on the port replicator, select the SPEED or AUTO mode with the performance selector switch on your computer. [. . . ]